Setting The Clock Mode; Setting The Date And Time - Xerox WorkCentre 490cx User Manual

Setting the Clock Mode

You can configure your machine to display time using either a 12 hour or 24
hour format.
1
Press the Menu
Then press the Start
2
Press the Up
CLOCK MODE appears on the LCD display.
The display prompts you to select either a 12 hour or 24 hour Clock
Mode.
3
Press 1 to select a 12 hour Clock Mode, or Press 2 to select a 24 hour
Clock Mode.

Setting the Date and Time

The current date and time are shown in the display when the machine is on
and ready for use (Standby mode). The date and time are printed on all
faxes you send.
1
Press the Menu
Then press the Start
displayed. A flashing cursor prompts you to enter the date.
1-52 Getting Started
button, then press the 0 + 1 buttons on the keypad.
button. PAPER SIZE appears on the display.
button two times.
button, then press the 0 + 3 buttons on the keypad.
button. The current date and time are