Table of Contents
Advertisement
Symptom
Paper skews or buckles
Transparencies stick
together in the paper exit.
Envelopes skew or fail to
feed correctly.
7-26
Troubleshooting
Cause and Solution
•
Ensure there is not too much paper in the
APF. Depending on the thickness of your
paper, the APF can hold up to 100 sheets of
paper.
•
Make sure the paper guide does not cause
the paper to bow in the APF.
•
Make sure you are using the correct type of
paper.
•
When loading paper, do not force the paper
down into the machine.
•
Make sure the right side of the paper is
aligned with the right edge of the feeder,
and the left paper guide is set against the
left side of the paper.
•
Make sure the envelope guide is not in the
envelope position.
Use only the transparencies specially designed
for printer. Remove each transparency as it
exits from the printer.
•
Ensure that the envelope guide has been
turned upright to the envelope load
position.
•
Ensure that the paper guide is against the left
side of the envelopes.
Advertisement
Table of Contents
Troubleshooting
