Table of Contents
Advertisement
The WorkCentre is set up at the factory to automatically answer an
incoming call. If you do not want the WorkCentre to answer the phone, set
the Receive mode to TEL. At the control panel, press the Receive Mode
button (until TEL displays).
Or, you may want to leave the Receive mode on Fax, but increase the
number of rings before the WorkCentre answers the call. At the control
panel, press the following keys:
MENU, 0, 1, Start, UP ARROW 7 TIMES (until ANSWER ON RINGS
displays)
Next, enter the number of times you want the telephone to ring before the
WorkCentre answers the call, and press the Clear/Stop
button.
9-30
Appendix
Advertisement
Table of Contents
Troubleshooting
