Table of Contents
Advertisement
You can configure your machine to print out a confirmation report
automatically each time a fax is sent.
To automatically print a confirmation report:
1
Press the Menu
Then press the Start
2
Press the Up
CONF. appears in the display.
a)
Press 1 to print a confirmation report automatically each time you
send a fax (ON).
Or
b)
Press 2 to turn this feature off (OFF).
Or
c)
Press 3 to print only when an error occurs and the transmission was
not successful (ERR).
If an error occurred during your fax transmission, an error message appears
in the display. If you receive an error message, press the Clear/Stop
button to clear the message and try to send the document again.
For a listing of error messages and their meanings, see LCD Display Error
Messages on page 7-10.
button, then press the 0 + 1 buttons on the keypad.
button.
or Down
buttons repeatedly until MESSAGE
Manual Faxing
3-11
3
Advertisement
Table of Contents
Troubleshooting
