Table of Contents
Advertisement
3
Press the Start
character of the date in the LCD display.
4
Enter the date and time using the Number Keypad. If you need
assistance entering characters using the Number keypad, refer to
Entering Alphanumeric Characters on page 3-29.
5
Press the Start
The WorkCentre 490cx returns to standby mode. If there are no ink
cartridges installed, ALL CART. EMPTY appears in the top line of the
display.
Note: If you do not set the date and time, after a short period of time the
machine will automatically accept whatever date and time are displayed on
power up. It will then go into standby mode.
Note: To power off the machine, unplug the power cord. Power must be
applied at all times if the machine is used as an unattended fax machine.
1-12
Getting Started
button. A flashing cursor will appear on the first
button to confirm your settings.
Advertisement
Table of Contents
Troubleshooting
