System Setup; Ringer Volume - Xerox WorkCentre 480cx User Manual

Print the 480cx User Guide

System Setup

Ringer Volume

You can adjust the volume of the ringer to the desired loudness.
1
Press the Menu button, then press the System Setup button on the one-
touch keypad. The display indicates RINGER VOLUME ?.
2
Press Enter, then press the Up or Down button to choose the desired
loudness of the ringer. You can choose between OFF, LOW,
MED (medium), or HIGH settings.
The selected ringer sounds and the display indicates the loudness level.
Note: The machine will work normally even if the ringer is set to off.
3
Press Enter when the desired volume level is selected. The display
indicates the next setup menu, DEFAULT SETTING ?. For details on
the Default Settings menu, see Default Settings on page 1-39.
4
To return to Standby mode, press the Stop button.
1-38 Getting Started
RINGER VOLUME
LEVEL [MED]