Xerox WorkCentre 490cx User Manual page 221

LCD Display
LINE ERROR
LOAD DOCUMENT
MEMORY FULL
NO ANSWER
NO. NOT ASSIGNED
Meaning
Your machine cannot
connect with the remote
site, or it has lost contact
because of a problem on
the phone line.
You have attempted to
set up a sending opera-
tion without loading a
document.
The machine's memory
is full.
The remote machine has
not answered and all
redial attempts have
been made.
The One-Touch or
Speed Dial location you
tried to use has no num-
ber assigned to it.
LCD Display Error Messages
Solution
• Try again. If the
failure persists, wait
an hour or so for the
line to clear, then
try again.
• Turn on ECM mode.
See User Options
(System Data) on
page 1-61.
Load a document and
try again.
• Delete unnecessary
documents.
• Retransmit after
more memory
becomes available.
• Split the
transmission into
more than one
operation.
Try again. Make sure
the remote machine is
operational.
• Dial the number
manually with the
numeric keypad.
• Assign the number
to a One-Touch or
Speed Dial button
and try again.
7-11
7