Table of Contents
Advertisement
•
REMOTE RCV CODE - The remote receive start code allows you to
initiate fax reception from an extension phone plugged into the EXT
jack on the side of the machine. If you pick up the extension phone and
hear fax tones, enter the Remote Code and the machine will start
receiving. The Remote Code is preset to *9* at the factory. You may
change the Remote Code by selecting any number from 0 to 9 on the
numeric keypad.
•
DIAL MODE - Select the type of dial system your fax machine is
connected to:
Press 1 if the fax machine is connected to a tone (Touch Tone) dial line.
Press 2 if the fax machine is connected to a pulse (Rotary) dial line.
Note: Pulse (Rotary) dialing is not available in all countries.
•
ECM MODE (Error Correction Mode) - This mode compensates for
poor line quality and ensures accurate, error-free communication with
any other ECM-equipped facsimile machine. If the line quality is poor,
transmission time may be increased when ECM is enabled.
Press 1 to turn the Error Correction mode on.
Press 2 to turn the Error Correction mode off.
1-64
Getting Started
Advertisement
Table of Contents
Troubleshooting
