Changing Copy Setup
When making copies, you may change the Contrast or Copy Size. This must
be done after the document is inserted into the Automatic Document Feeder.
After making a copy, the machine will return to the original default settings.
Therefore, you must repeat the Copy Setup changes for the next copy job.
To change copy Contrast:
1
With the document inserted in the Automatic Document Feeder, press
the Lighten/Darken
displayed on the LCD display.
2
To change the Contrast, continue to press the Lighten/Darken
button. The setting will change each time you press the button. You may
choose NORMAL, DARKEN, LIGHTEN, or FAX PHOTO.
Note: After releasing the button, the machine will switch to the mode
currently displayed. It is not necessary to press any other buttons for this
action.
3
When the desired Contrast setting has been selected, return to the
procedure that was being performed.
button. The current Contrast setting is
CONTRAST
[
NORMAL
]
Changing Copy Setup
2
2-5