Installing Ink Cartridges - Xerox WorkCentre 490cx User Manual

Installing Ink Cartridges

Your machine is a dual cartridge Inkjet printer. You must use a black and a
color ink cartridge. When viewed from the front of the machine, the Black
Ink Cartridge installs in the right Cartridge Holder while the Color Ink
Cartridge installs in the left Cartridge Holder.
When installing ink cartridges, you must provide specific information to the
WorkCentre 490cx about the cartridges you install. This allows the printer
to keep track of which cartridges are installed and to gauge ink cartridge
utilization. There are two methods of entering this information. You may
enter the required information directly via the WorkCentre 490cx control
panel or you can update Ink Cartridge information using the WorkCentre
490cx Printer Driver Software and a PC.
The procedures in this section cover Ink Cartridge Installation without using
the WorkCentre 490cx Printer Driver Program. To install Ink Cartridges
using the WorkCentre 490cx Printer Driver Program, refer to The Xerox
WorkCentre Control Program on page 5-11.
Note: For the following Xerox print cartridges, please contact your nearest
Xerox dealer:
- High Capacity Black Print Cartridge (8R7881)
- Color Print Cartridge (8R12591)
Set Up Your Machine
1
1-13