Creating A Customdso Setup File - LeCroy WaveRunner Xi series Operator's Manual

W R X S
AVE UNNER I
1163 CustomDSO.Actio nEnable1 =
1164 CustomDSO.Ac tionScript1 =
1165 CustomDSO.ActionEnable1 =
1166 CustomDSO.ActionScript1 =
1167 CustomDSO.ActionEnable1 =
1168 CustomDSO.ActionScript1 =
1169 CustomDSO.ActionEnable1 =
The text in green following a single quotation mark is a VBS comment and causes no action.
The text in red contains the path and name of the setup file associated with the numbered button. This setup w
be called when the button is pressed.
The Boolean (in blue) deci
For example, in setup B, A.lss and C.lss can be invoked, but not B, which is al
As you see from the line numbers in the program fragments, the se
all the information needed to set the DSO to the required state. But if you want to make a very short file that
changes only a few variables (for example, the action button settings) you can make a file that includes only the
relevant instructions. This usage assumes that the remainder of the DSO is already in the required state. This is
an example of the complete compatibility of the instrument's software. The same commands can be used in
setups, in scripts, or in remote control commands in external programs, whether resident in the instrument or in
an external computer.

Creating a CustomDSO Setup File

If you touch the Edit button
file, you will see a message like this:
If you then touch Yes, the DSO will display a file like this:
' XStreamDSO ConfigurationVBScript ...
' Created by CustomDSO ...
On Error Resume Next
set dso = CreateObject("LeCroy.XStreamDSO.1")
' dso.Display.GridMode = "Dual"
' dso.Acquisition.C1.VerScale = 0.1
' dso.Acquisition.Horizontal.HorScale = 1e-6
' dso.Acquisition.TriggerMode = "Auto"
You can add to this fragment any commands you need.
218
ERIES
True
"c:\LeCroy\XStream\CustomDSO\B.lss"
True
"c:\LeCro y\XStream\CustomDSO\C.lss"
False
"c:\LeCroy\XStream\CustomDSO\A.lss"
False
des whether the action button will invoke the setup or remai
when the Setup file to recall field contains the name of a non-existent
n inactive.
ready in place.
tup files are rather long because they include
ill
WRXi-OM-E Rev C