Auto Setup - LeCroy WaveAce Series Getting Started Manual

WaveAce

Auto Setup

The WaveAce Series Digital Storage Oscilloscopes has an Auto Setup
function that identifies the waveform type and automatically adjusts controls
to produce a usable display of the input signal. Four Auto Setup waveform
options are available: Multi-Cycle, Single-Cycle, Rising Edge, and
Falling Edge. Press the AUTO front panel button, and then press the menu
optoin button adjacent to the desired waveform as follows:
Note: Use the waveform menu button to Undo an applied Auto Setup.
Option
（Multi-cycle）
（Single-cycle）
（Rising edge）
（Falling edge）
（Undo Setup）
26
Auto set the screen and display several cycle signal.
Set the screen and auto display single cycle signal.
Auto set and show the rising time.
Auto set and show the falling time.
Causes the oscilloscope to recall the previous setup.
Description
WA-GSM-E-RevA