Formatting The Report; Managing Notebook Entry Data; Adding Annotations; Deleting Notebook En Tries - LeCroy WaveRunner Xi series Operator's Manual

W R X S
AVE UNNER I

Formatting the Report

LeCroy provides a default report format (template); however, you can use your own format, including company
logo.
1. Touch the Adva nced tab.
the Directory field and navigate to a folder to co
2. Touch inside
3. Touch the Browse button next to Template to navigate to an existing report format that you want to use. Or
touch inside the Template field and enter the name and path to the template, using the pop-up keyboard.
Otherwise, touch the Use Default checkbox to use LeCroy's format.
To use a logo other that the one provided, which indicate the oscilloscope that produced the report, browse to
the bit map file or touch inside the Logo field and enter
Otherwise, touch the Use Default checkbox to u
Note: If you elect to use your own logo bit map, do not use a bit map larger than 180 pixels (height) x 100
pixels (width).

Managing Notebook Entry Data

Adding Annotations

You can add annotations to your notebook entry at any time.
1. Touch the LabNotebook tab.
2. Touch the notebook entry you want to annotate in the scroll list box. A new tab will appear bearing the na
of the selected notebook entry.
3. Touch the new tab, then the Scribble button
drawing toolbar, described in Creating a Notebook Entry.
Deleting Notebook En
1. Touch the LabNotebook tab.
2. Touch the Delete All button
touch the Dele te button
232
ERIES
se Le
tries
to clear the database, or Select a notebook entry in the list box, then
to discard just that one entry.
ntain the reports.
s
the name and path to the file, using the pop-up keyboard.
Croy's logo:
. The notebook entry will appear again with
me
the
WRXi-OM-E Rev C