Standard Vertical Parameters
These are the default Standard Vertical Parameters:
Standard Horizontal Parameters
These are the default Standard Horizontal Parameters:
My Measure
You can choose to customize up to eight parameters by touching My Measure.
Parameter Math (WRXi-XMATH or WRXi-XMAP option required
The instrument gives you the ability to perform arithmetic operations (addition, subtraction, multiplication, division)
on the results of two parameter measurements. Alternatively, you can apply math to a single parameter (for
example, invert). By customizing parameters in this way, you can effectively extend the range of parameter
measurements based on your particular needs.
Logarithmic Parameters
The parameter math feature prevents multiplication and division of parameters that return logarithmic values.
These parameters are as follows:
•
Auto-correlation signal-to-noise ratio (ACSN)
•
Narrow-band power (NBPW)
WRXi-OM-E Rev C
Vertical
mean
sdev
max.
min.
ampl
pkpk
top
base
Horizontal
freq
period
width
rise
fall
delay
duty
npoints
O
'
M
PERATOR
S
)
ANUAL
103