Creating A Network-Ready Startup Disk - LeCroy WaveSurfer 400 Series Service Manual

(3) Configure so that others can access the folder C:\FW over the network with the
share name "FW". (If you use Windows XP, right-click the FW folder icon to call
up the FW Properties dialog box and configure the settings as shown on Figure
6.2)
6.4.2.4

Creating a network-ready startup disk

<Required items>
1. WS400 Series Control Program (DVD-R for loading on the hard disk)
2. PC with Windows running on it
3. DVD-ROM drive (irrespective of built-in type or external type)
4. Floppy disk drive (irrespective of built-in type or external type)
5. An empty floppy disk. A floppy disk label (Inscribe "Startup Disk for WS400
Series Control Program" on it.)
6. Master DVD labeled as "WS400 Series Control Program (DVD-R for loading
on the hard disk)"
Figure 6.1 Copy
destination
of the folders
Figure 2.2 Sharing
setup
Maintenance 6-17