LeCroy WaveRunner Xi series Operator's Manual page 118

W R X S
AVE UNNER I
Parameter Description
Local tmax
Time of the maximum valu
a local feature.
Local tmin
Time of the minimum value of a
local feature.
Local tot
Time a local feature spends
over a user specified
percentage of its peak-to-
troug
Local tpt
Time between local feature
peak and trough.
Local ttp
Time betwee
trough and the next local peak.
Local tut
Time a local feature spends
under a user specified
percentage of its peak-to-
trough amplitude.
Mathcad
Produces a parameter using a
user-specified Mathcad
function.
MATLAB
Produces a parameter using a
user-specified MATLAB
function.
118
ERIES
e of
h amplitude.
n local feature
Definition Notes
Hysteresis argument used to
discriminate levels fro m noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Hysteresis argument used to
discriminate levels from no
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Hysteresis argument used to
discriminate levels fro m noise
in data.
Available with DDM2 option.
Standard in DDA-500 5A.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-50 05A.
Hysteresis argument used
discriminate leve ls from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM 2 option.
Standard in DDA-5005 A.
Available with XMAP option.
Mathcad 2001i or later must
be loaded on the instrument.
Available with XMAP option.
MATLAB must be loaded on
the instrument.
WRXi-OM-E Rev C
ise
to