LeCroy WaveRunner Xi series Operator's Manual page 116

W R X S
AVE UNNER I
Parameter Description
Hist median
Value of the "X" axis of a
histogram that divides the
population into two equal
halves.
Hist minimum
Value of the lowest (left-most)
populated bin in a histogram.
Hist rms
Root mean square of the
values in a histogram.
Hist sdev
Standard deviation of values in
a histogram.
Hist top
Value of the right-most of the
two most populated histogram
peaks.
Hold time
Time from the clock edge to the
data edge. You can set levels,
slope, and hysteresis
independently for Hold Clock
and Hold Data. See also Setup
paramete
Last
Time from trigger to last
(rightmost) cursor.
Level@X
Gives the vertical value at the
specified x position. If the x
position is betwee
it gives the interpolated value.
When the Nearest point
checkbox is checked, it gives
the vertical value of the nearest
data point.
Local base
Value of the baseline for a local
feature.
116
ERIES
r.
n two points,
Definition
Ti me from trigger to last
cu rsor
Notes
Available with DDM2, JTA
and XMAP options.
Standard in DDA-5005A.
Available wi th DDM2, JTA2,
and XMAP options.
Standa rd in DDA-5005A.
Available with DDM2, JTA2
and XMAP options.
Standard in DDA-5005A.
Available with DDM2, JTA2,
and XMAP options.
Standard in DDA-5005A.
Available with DDM2, JTA2,
and XMAP options.
Standard in DDA-5005A.
Reference levels and edge-
transition polarity can be
selected. Hysteresis argument
used to discriminate levels
from noise in data.
Available with JTA2 and
XMAP options.
Indicates location of right
cursor. Cursors are
interchangeable: for exampl
the right cursor may be mov
to the left of the left cursor and
first will give the location of the
cursor formerly on the left,
now on right.
Standard parameter.
Standard parameter.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
WRXi-OM-E Rev C
2,
,
e,
ed