Table of Contents
Advertisement
ON-SCREEN TOOLBARS, ICONS, AND DIALOG BOXES
Menu Bar Buttons
The menu bar buttons at the top of the oscilloscope's display are designed for quick setup of common functions.
At the right end of the menu bar is a quick setup button that, when touched, opens the setup
dialog associated with the trace or parameter named beside it. The named trace or parameter is
the one whose setup dialog you last opened.
The Setup... button also appears as an Undo button after the Autosetup front panel button is
pressed and after a zoom. If you want to undo these operations, you must select Undo
immediately after you perform the Autosetup or zoom; i.e., there can be no intervening
operations.
For common oscilloscope operations, you will not need to use the menu bar, since you can access most dialogs
from the front panel or from the descriptor labels. However, it is the only way to access the following functions:
•
Display Setup
•
Save or Recall Waveform
•
Save or Recall Setups
•
Printer Setup
•
Vertical (Channel), Horizontal, or Trigger Status
•
Memory (Reference Waveform) Setup
•
Pass/Fail Setup
•
Utilities and Preferences Setup
•
Help Manual
WRXi-OM-E Rev C
O
'
M
PERATOR
S
ANUAL
35
Advertisement
Table of Contents
