W
R
X
S
AVE
UNNER
I
upper level and a lower level.
Automatic Setup
•
Autosetup: Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
•
Vertical Find Scale: Automatically sets the vertical sensitivity and offset for the selected channels to display
a waveform with maximum dynamic range.
Probes
•
Probes: One PP008 probe per channel standard (WR104MXi, WR104Xi, WR204Xi: one PP007 per channel);
optional passive and active probes are available.
•
Probe System - ProBus: Automatically detects and supports a wide variety of compatible probes
•
Scale Factors: Automatically or manually selected depending on probe used
Color Waveform Display
•
Type: Color 10.4-inch flat panel TFT LCD with high resolution touch screen
•
Resolution: SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
•
Real Time Clock: Date, hours, minutes, and seconds displayed with waveform; accurate to ±50 ppm; SNTP
support to synchronize to precision internet clocks
•
Number of Traces: Maximum of eight traces; simultaneously displays channel, zoom, memory, and math
traces
•
Grid Styles: Single, Dual, Quad, Octal, XY, Single+XY, Dual+XY
•
Waveform Display Styles: Sample dots joined or dots only
Analog Persistence Display
•
Analog and Color-graded Persistence: Variable saturation levels; stores each trace's persistence data in
memory
•
Persistence Selections: Select analog, color, or 3-D
•
Trace Selection: Activate Analog Persistence on all or any combination of traces
•
Persistence Aging Time: From 500 ms to infinity
•
Sweeps Displayed: All accumulated or all accumulated with last trace highlighted
Zoom Expansion Traces
Display up to 4 Math/Zoom traces
Internal Waveform Memory
Waveform: M1, M2, M3, M4 (Store full-length waveforms with 16 bits/data point.) Or save to any number of files
(limited only by data storage media).
Setup Storage
Front Panel and Instrument Status: Save to the internal hard drive or to a USB-connected peripheral device.
18
ERIES
WRXi-OM-E Rev C