Configuring The Remote Control Assistant Event Log; Hardcopy; Printing; Clipboard - LeCroy WaveRunner Xi series Operator's Manual

Configuring the Remote Control Assistant Event Log

bar touch Utilities, then Utilities Setup... in the drop-down menu.
1. In the menu
2. Touch the Remote tab.
3. Touch inside the Log Mode field.
4. Select Off, Errors Only, or Full Dialog from the pop-up menu.
5. To export the contents of the event log to an ASCII text file, touch the Show Remote Control Log button: the
Event Logs popup window appears. Touch inside the DestFilename field and enter a file name, using the
pop-up keyboard. Then touch the Export to Text File button.

Hardcopy

Printing

For print setup, refer to Printing.

Clipboard

This selection prints to the clipboard so you can paste a file into another application (like MS Word, for example).
P C
RINTING FROM THE LIPBOARD
1. In the menu bar touch Utilities, then Utilities Setup... in the drop-down menu.
2. Touch the Hardcopy tab.
3. Under Colors, touch the Use Print Colors checkbox if you want the traces printed on a white background. A
white background saves printer toner.
4. Touch the Grid Area Only checkbox if you do not need to print the dialog area and you only want to show the
waveforms and grids.
5. Touch the Print Now button.
WRXi-OM-E Rev C
O ' M
PERATOR S ANUAL
161