Histograms; Creating And Viewing A Histogram; Single Parameter Histogram Setup - LeCroy WaveRunner Xi series Operator's Manual

4. Touch inside the Source1 field and select an input waveform from the pop-up menu.
5. Touch inside the Measure field and select a parameter from the pop-up menu.
6. Touch the Track button
menu, select a math function location (F1 to Fx The number of math traces available
options loaded on your oscilloscope.
displayed along with the trace label
selected.
splayed Track math function trace label if you want to change any settings in the Track
7. Touch the newly di
dialog:

HISTOGRAMS

Creating and Viewing a Histogram

Note: The number of sweeps comprising the histogram will be displayed in the bottom line of the trace
descriptor label:

Single Parameter Histogram Setup

F M D
ROM EASURE IALOG
1. In the menu bar, touch Measure, then Measure Setup.
2. Touch the My Measure button.
3. Touch one of tabs P1 through Px.
4. Touch inside the Source1
5. Touch inside the Measure field and select a p
6. Touch the Histogram button at the bottom of the dialog.
7. Touch a math trace in which to place the resul
8. Touch the math trace label for the math trace you just created.
WRXi-OM-E Rev C
at the bottom of the dialog; then, from the Math
See specifications.) to store the Track display. The Track will be
field and select an input waveform from the pop-up menu.
arameter from the pop-up menu.
ting histogram, then close the pop-up menu.
Example Track Trace Label for the math function you
O ' M
PERATOR S ANUAL
selection for Track
depends on the software
87