Table of Contents
Advertisement
W
R
AVE
UNNER
SMART Triggers
•
Dropout: Triggers if the input signal drops out for longer than a selectable time‐
out between 1 ns and 20 s.
•
Glitch: Triggers on positive or negative glitches with widths selectable from 500
ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
•
Signal or Pattern Interval: Triggers on intervals selectable from 1 ns to 20 s.
•
Runt: Trigger on positive or negative runts defined by two voltage limits and
two time limits. Select between 1 ns and 20 s.
•
Slew Rate: Activates a trigger when the rising or falling edge of a pulse crosses
two threshold levels, an upper level and a lower level.
Automatic Setup
•
Autosetup: Automatically sets timebase, trigger, and sensitivity to display a
wide range of repetitive signals.
•
Vertical Find Scale: Automatically sets the vertical sensitivity and offset for the
selected channels to display a waveform with maximum dynamic range.
Probes
•
Probes: One passive probe per channel standard (WR104MXi‐A, WR104Xi‐A,
WR204Xi‐A); optional passive and active probes are available.
•
Probe System ‐ ProBus: Automatically detects and supports a wide variety of
compatible probes
•
Scale Factors: Automatically or manually selected depending on probe used
Color Waveform Display
•
Type: Color 10.4‐inch flat panel TFT LCD with high resolution touch screen
•
Resolution: SVGA; 800 x 600 pixels; maximum external monitor output
resolution of 2048 x 1536 pixels
•
Real Time Clock: Date, hours, minutes, and seconds displayed with waveform;
accurate to ±50 ppm; SNTP support to synchronize to precision internet clocks
•
Number of Traces: Maximum of eight traces; simultaneously displays channel,
zoom, memory, and math traces
112
Xi-A
MXi-A S
AND
ERIES
WRXi-A-GSM-E Rev A
Advertisement
Table of Contents
