Set Host Mode Operation; Set Ip Address Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Set Host Mode Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Mode,option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX,
0x00,0xXXXXXXXX,
0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],
Num. of Host Groups=2
[Install]
Install function
Set Host Mode

Set Host Mode operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 148 Set Host Mode Operation
Item
Port
HostGrpID
Mode
Option[0:31]
Option[32:63]
Option[64:95]
Num. of Host
Groups

Set IP Address Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,,,Seq.=xxxxx
+{IP Address,Subnet Mask}={(123.456.789.123),(255.255.255.255)}
+Use Duplex= Valid
+SVP Kind= Master SVP
+IPv4=Valid
+IPv6=Valid
+{ M-SVP IPv4(IP Address,Subnet Mask),IPv6(IP Address,Subnet Prefix)}={((111.222.333.444),
(255.255.255.255)),((1111:2222:3333:4444:5555:6666:7777:8888),64)}
+{ S-SVP IPv4(IP Address,Subnet Mask),IPv6(IP Address,Subnet Prefix)}={((555.666.777.888),
(255.255.255.255)),((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),64)}
[Install]
182 Install Function
Description
The name of the port where the host group is created.
The host group number.
The host mode set. See the HP StorageWorks XP24000/XP20000 LUN Manager User's
Guide for the meaning of the host mode number.
The host mode option set. Hexadecimal values are output. See
for the relation of output values and host mode option.
The number of host groups that the host mode setting is changed.
Table 148.
Table 189 on page 215