Make Volume Operation; Install Cv Operation; Parameters For Make Volume Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed information displays for this operation, as shown in
Table 281 Install CV Operation
Item
PG
LDKC:CU:LDEV
Start LBA
Emulation
Size
Unit
System Disk
Num. of LDEVs

Make Volume Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Make Volume,,Normal end,,,Seq.=xxxxxx
+[PG,LDKC:CU:LDEV,Emulation,Size,Unit,System Disk]=[{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,
XXXXXXXXXXXXXXXX,KB,Disable },
{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,XXXXXXXXXXXXXXXX,KB,Disable}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Make Volume
Make Volume operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table
Table 282 Parameters for Make Volume Operation
Parameter
Non Format
308 Virtual LVI / Virtual LUN (VLL) Function
Description
The parity group number
The parity group number whose first letter is E indicates that an external volume is present
in the parity group.
The LDKC, CU, and LDEV numbers
The start LBA
A hyphen (-) is output when not specified.
The emulation type
The user-specified capacity
The unit of the CV capacity. The output unit is different according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Indicates system disk status
Enable: Enabled, Disable: Disabled
The number of LDEVs
282.
Description
Unformatted Make Volume. The logged information indicates that the volume was created.
Table 281.