Parameters For Edit-Exctg Operation; Edit-Exctg Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x00,0x00,0x01,
65432,5,0x00:
0x20:0x00,Normal end},{0x00,0x01,0x01,65432,5,0x00:0x20:0x00,Normal end}]
+{LDKC,EXCTG}={0x00,0x01}
++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x01,0x00,0x01,
65433,5,0x00:
0x20:0x00,Normal end}]
+Num. of EXCTGs=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
Edit-EXCTG
Extended consistency group operation
Add
Add is selected as the parameter. This operation uses the following parameters:
Table 267 Parameters for Edit-EXCTG Operation
Parameter Description
Add Add journal groups to the extended consistency group.
Remove Remove journal groups from the extended consistency group.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in
Table 268 Edit-EXCTG Operation
Item
LDKC
EXCTG
LDKC
JNLG
MirrorID
S/N
CTRLID
Cmd.Dev.
(LDKC:CU:LDEV)
296 Universal Replicator (UR) for Mainframe Function
Description
The extended consistency groups LDKC number
The number of the extended consistency group
The journal group's LDKC number
The journal group number
The mirror ID
The serial number of the logical device (storage system)
The controller ID
The LDKC, CU, and LDEV numbers of the remote command device
Table 268.