Set Ftp Server Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

This information displays in the syslog information file only. No parameters display for this event.
[Audit Log]
Audit Log function
Over Threshold
Over Threshold event
Normal end
The operation has ended normally.

Set FTP Server Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog], Set FTP Server,,Normal end,
Seq.=xxxxx
+{ServerType,IPAddrVer,OutFlg,SrvAddr,UserName,OutputDir}=[{Primary,IPv4,Disable,
192.168.0.1,root,/Data/AuditLog},
-{Secondary,IPv6,Enable,3ffe:0501:4819:2000:5254:00ff:fedc:50d2,-,-}]
[Audit Log]
Audit Log function
Set FTP Server

Set FTP Server operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in
Table 15 Set FTP Server Operation
Item
ServerType
IPAddrVer
OutFlg
SrvAddr
Description
The server type of the FTP (File Transfer Protocol) server to be set. If the setting is not
changed, a hyphen (-) is displayed.
Primary: Primary FTP server. Secondary: Secondary FTP server.
The version number of the internet protocol. If the setting is not changed, a hyphen (-) is
displayed.
IPv6: Internet Protocol Version 6. IPv4: Internet Protocol Version 4
Whether to transfer the audit log information file (audit.log) to the FTP server.
Enable: Transfer audit log information file. Disable: Do not transfer audit log information
file.
The IP address to which the audit log information file is sent. If the setting is not changed,
a hyphen (-) is displayed.
XP24000/XP20000 Audit Log User and Reference Guide
Table 15.
63