Set Command Device (Commanddev) Operation; Set Channel Speed Operation; Set Commanddev Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Set Channel Speed operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 143 Set Channel Speed Operation
Item
Port
Speed(Gbps)
Num. of Ports

Set Command Device (CommandDev) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
[Install]
Install function
Set CommandDev

Set CommandDev operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 144 Set CommandDev Operation
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs
Description
The name of the port that the channel speed is set.
The channel speed set.
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
The number of ports where the channel speed is set.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is
set
Indicates whether the command device setting is enabled or disabled
Disable or Enable will appear.
The number of logical volumes where the command device is set
XP24000/XP20000 Audit Log User and Reference Guide
Table 143.
Table 144.
179