Set Channel Speed Operation; Set Command Device (Commanddev) Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
WWN
Num. of WWNs

Set Channel Speed Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Channel Speed,,Normal end,,,Seq.=xxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,10}],Num. of Ports=4
[LUNM]
LUN Manager function
Set Channel Speed

Set Channel Speed operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 179 Set Channel Speed Operation
Item
Port
Speed(Gbps)
Num. of Ports

Set Command Device (CommandDev) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Description
Indicates WWN of the host deleted from the host group.
The number of hosts (WWN) deleted from the host group.
Description
The name of the port that the host speed (data transfer speed) is set.
The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host
speed, Auto is output.
The number of ports where the host speed is set.
XP24000/XP20000 Audit Log User and Reference Guide
Table 179.
207