Volume-Format(Q) Operation; Volume-Format(H) Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed information displays for this operation, as shown in
Table 167 Volume-Format(H) Operation
Item
LDKC:CU:LDEV
Num. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.

Volume-Format(Q) Operation

The logged information indicates that the Quick Format operation was only requested, but not finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Format(Q),,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05,
0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A],
Num. of LDEVs=XXX
[LDEV]
Logical Device function
Volume-Format(Q)

Volume-Format(H) operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 168 Volume-Format(Q) Operation
Item
LDKC:CU:LDEV
Num. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.
Description
The LDKC number, the CU number, and LDEV number
The number of LDEVs being set
Description
The LDKC number, the CU number, and LDEV number
The number of LDEVs being set
XP24000/XP20000 Audit Log User and Reference Guide
Table 167.
Table 168.
199