Set Command Device Security (CommandDevSec) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set CommandDevSec,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
[Install]
Install function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 145 Set CommandDevSec Operation
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs
Set Encryption Key Operation
See
"Install Function
Set Fibre Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Address,,Normal end,,,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
[Install]
Install function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
180
Install Function
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is
set
Indicates whether the command device security setting is enabled or disabled
Disable or Enable will appear.
The number of logical volumes where the command device is set
Set Encryption Key
Operation" on page 341.
Table
145.