Orm Value Operation; Parameters For Orm Value Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

ORM Value Operation

Example 1 (changing the threshold of FC/SATA)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],ORM Value,Alter,Normal end,,,Seq.=xxxxx
+Type=7days
+{Read Err.(Unrecovered),Read Err.(Recovered),Seek Err.(Recovered),Seek Err.
(Unrecovered),
Not Ready,Other Errors}={15,1.00e-008,100,10,10,10}
++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152
Example 2 (changing the threshold of a solid state drive)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,
00:00,[Information],ORM Value,Alter,Normal end,,,
Seq.=xxxxx
+Type=Total
+{Total Defect Count}={15}
++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152
Example 3 (Error Reset)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],ORM Value,Error Reset,Normal end,,,Seq.=xxxxx
+PDEV=HDDR00-01
[Information]
Information function
ORM Value
ORM Value operation
Alter and Error Reset
Alter is the selected parameter for example 1 and Error Reset is the selected parameter for example
2. This operation uses the following parameters, as shown in
Table 99 Parameters for ORM Value Operation
Parameter
Alter
Error Reset
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
144 Information Function
Description
Change the threshold of ORM (Online Read Margin).
Indicates Error Reset.
Table 99.