Change Option Operation; Change Ctg Option - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed Information
Detailed information displays for this operation, as shown in
Table 49 Change CTG Option
Item
LDKC
CTG
Offloading(s)
Inflow Control
Copy Pending
(min.)
RCU Ready (min.)

Change Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac], Change Option,,Normal end,,,Seq.=xxxxx
+{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s),
Service SIM,Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s), Parallel Initial Copy(CU)}=
-{0x00,0x00,Not Report,Yes,600,4},{0x00,0x01,Not Report,Yes,600,4},{0x00,0x02,
Not Report,
Yes,600,4},{0x00,0x03,Not Report,Yes,600,4},{0x00,0x04,Not Report,Yes,600,4},
(snip)
-(snip), Num. of CUs=255
[Cnt Ac]
HP XP Continuous Access Software function
Change Option

Change Option operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 50 Change Option Operation
Item
Parallel Initial Copy
Description
The LDKC number.
The consistency group number of the consistency group (CT group) where the option is
changed.
The value set to the monitoring time of transfer to the side file. The unit is second.
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
The setting value for Time Out (Copy Pending). The unit is minute. When Time Out (Copy
Pending) is set to 0 (zero), None is output.
The setting value for Time Out (RCU ready). The unit is minute. When Time Out (RCU
ready) is set to 0 (zero), None is output.
Description
The maximum number of initial copy operations set. (1 to 512)
XP24000/XP20000 Audit Log User and Reference Guide
Table 49.
Table 50.
93