Set Priority (Prio) Wwn Operation; Set Prio Port Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 219 Set Prio Port Operation
Item
Port
Priority
Use
Threshold/ Upper
Limit
Mode
Num. of Ports

Set Priority (Prio) WWN Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Prio WWN,,Normal end,,,
Seq.=xxxxx +{WWN,Priority,Upper Limit,Mode}=[{0xXXXXXXXXXXXXXXXX,
Non-Prio,XXXXXXXX,IOPS}],Num. of WWNs=1
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set Prio WWN
Set Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
242 XP Performance Control (Perf Ctrl) Function
Description
The port name.
The attribute set to the port.
Prio: Prioritized port, Non-Prio: Non-prioritized port
The channel type of path interface. Indicates whether the threshold is set or not in case
of the prioritized port and whether the upper limit value is set or not in case of
non-prioritized port.
Enable: Value is set, Disable: Value is not set.
The threshold in case of prioritized port and the upper limit value in case of non-prioritized
port. This value is output only when the threshold or the upper limit value is set.
The type of rate used for upper limit control and threshold control.
IOPS: I/O rate, KB/s: Transfer rate.
This value is output when the threshold or the upper limit value is set.
The number of ports that the setting is changed.
Table 219.