Receiving Command From The Host; Interface Name And Operation Name Output To Audit Log Information File - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Function Name
Shredder
VSEC
VVOL
XRC
1
For information on using XP Auto LUN Software, contact HP Technical Support.

Receiving Command from the Host

Table 7 shows the interface name and the operation name output to the Audit Log Information File in
receiving command from the host. For details about the interface name and the operation name, see
Chapter 44 on page 337.
Table 7 Interface Name and Operation Name Output to Audit Log Information File
Interface Name and Opera-
tion Name
FC-SP
M/F I/F
OPEN I/F
50 Information Output in the Audit Log Information File
Operation and Page
End Shredding Operation, page 263
Set Shredding Operation, page 263
Suspend Shredding Operation, page 264
Set Group Operation, page 323
Add V-Vol (Snapshot) Operation, page 327
Add V-Vol (THP) Operation, page 328
Asso V-VOL/Rel Pool Operation, page 329
Delete V-Vol (Snapshot)
Operation, page 330
Delete V-Vol (THP) Operation, page 330
Emulation Operation, page 331
Pool Change/Delete Operation, page 332
Pool Optimize Operation, page 333
Pool Restore Operation, page 333
Pool SIM Comp Req Operation, page 334
Set Pool Operation, page 334
Set XRC Option Operation, page 335
Page Name of Corresponding Function and Operation
337 The FC-SP authentication has ended.
The mainframe system host or the storage system has sent the
337
commands.
The open system host (XP RAID Manager or XP RAID Manager
338
interface) or the storage system has sent the commands.
Option Name
Volume Shredder
Volume Security
XP Snapshot
XP Thin Provisioning (THP)
XP Snapshot
XP Thin Provisioning (THP)
XP Snapshot
XP Thin Provisioning (THP)
Compatible XRC