Page 1 HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide Abstract This document describes the system logs generated by XP Remote Web Console and SVP operations. Topics include how to view and redirect log output. The intended audience is a storage administrator or authorized service provider with independent knowledge of HP StorageWorks XP storage systems and XP software.
Page 2 Legal and notice information © Copyright 2007, 2009 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.
Page 3: Table Of Contents
Contents 1 Introduction ..................23 Purpose of Audit Logs ........................ 23 Download the Audit Log Information Files to the Remote Web Console Computer ......24 Download the Syslog Information File to the Remote Web Console Computer ........24 Transferring the Audit Log Information File to the FTP Server ............24 Transferring the Audit Log Files to Syslog Servers ................
Page 4 Environment Setting Operation ....................69 Login Operation ........................70 Logout Operation ........................70 Release HTTP Block Operation ....................71 Set CVAE Info Operation ......................72 Set System Info Operation ......................72 Set Up HTTP Block Operation ..................... 73 Storage Device Add Operation ....................74 Storage Device Del Operation ....................
Page 5 Journal-Vol Operation (Group-Delete Parameter) ................105 Paircreate Operation ....................... 106 Pairresync Operation ....................... 107 Pairsplit-r Operation ........................ 108 Pairsplit-S Operation ....................... 109 Pair-Option Operation ......................110 R-Cmd. Dev. Operation ......................111 System-Option Operation ......................112 14 XP for Compatible Parallel Access Volumes (CPAV) Software Function ...................
Page 6 21 Information Function ..............143 Delete Log Operation ......................143 ORM Value Operation ......................144 SIM Complete Operation ......................145 SIM Reporting Option Operation ....................146 Threshold Value Operation ....................... 147 22 Install Function ................149 Add Host Group Operation ..................... 149 Add LU Path Operation ......................
Page 7 Uninstall Operation ......................... 190 Update Config Operation ......................195 Volume to Space Operation ..................... 196 23 Logical Device (LDEV) Function ............197 Volume-Blockade Operation ..................... 197 Volume-Format Operation ......................197 Volume-Format(H) Operation ....................198 Volume-Format(Q) Operation ....................199 Volume-Restore(N) Operation ....................200 24 LUN Manager (LUNM) Function .............
Page 8 Switch SVP Operation ......................231 Transfer Config Operation ....................... 232 Type Change Operation ......................232 Verify Operation ........................233 Verify Stop Operation ......................233 27 On-Demand (OND) Function ............235 Release Cache/CLPR Operation ....................235 28 XP Performance Control (Perf Ctrl) Function ........237 Change XP Performance Control Group (PerfCtrlGrp) Operation ...........
Page 9 34 ShadowImage (SI) for Mainframe Function ........267 Add Pair Operation ........................ 267 Change Reserve Operation ...................... 268 Consistency Group (CTG) Operation ..................268 Delete Pair Operation ......................269 Initialize Operation ......................... 270 Option Operation ........................270 Resync Pair Operation ......................271 Split Pair Operation ........................
Page 10 Volume Initialize Operation ...................... 311 Volume to Space Operation ..................... 312 40 XP Auto LUN Software Function ............313 Create Auto Plan Operation ..................... 313 Del Auto Plan Log Operation ....................313 Delete Auto Plan Operation ...................... 313 Del Migration Log Operation ....................314 Set Auto Plan Param Operation ....................
Page 11 Conventions for Storage Capacity Values ................... 343 HP Technical Support ......................343 Subscription Service ........................ 344 HP Websites .......................... 344 Documentation Feedback ......................344 A Audit Log Information File Output by Function ........345 B SVP Operations Output to the Audit Log File ........363 C CFL Extension Operations Output to the Audit Log Information File ..
Page 12 Figures Audit Log Transfer Window ..................26 Syslog Window ...................... 28 Audit Log Setting Window ..................29 Audit Log Information File ..................33 Syslog Information File ..................... 36 Items Described in Sample Audit Logs ................ 53 Sample Audit Logs ....................53...
Page 13 Tables Audit Log File Components ..................29 Items in Audit Log Information File ................33 Symbols Used in Detailed Parameter Information ............35 Items in the Syslog File ..................... 37 Audit Log Function and Event in Syslog File ..............39 Audit Log Information File Functions, Operations, and Programs ........
Page 14 Change Reserve Operation ..................77 Option Operation ....................78 Pair Create Operation ..................... 79 Pairresync Operation ....................80 Pairsplit Operation ....................81 Pairsplit-E Operation ....................81 Pairsplit-S Operation ....................82 Delete M/F DCR Operation ..................84 Delete Open DCR Operation ..................84 Set M/F DCR Operation ..................
Page 15 Add Alias Operation ..................... 115 Delete Alias Operation ..................116 Attribute Operation ....................117 Parameters for Expiration-Lock Operation ..............118 Set Operation ...................... 119 MailAddress Write Operation ................. 121 Valid Flag Update Operation ................. 122 Add Quorum Disk Operation ................. 123 Del Quorum Disk ID Operation ................
Page 16 Add WWN Operation ..................151 All Config Operation ..................... 151 Assist Config Operation ..................152 Backup Config Operation ..................153 Change Host Group Operation ................153 Change WWN Operation ..................154 Delete DKC WWN Operation ................155 Delete Host Group Operation ................. 156 Delete LU Path Operation ..................
Page 17 Set CommandDev Operation .................. 179 Set CommandDevSec Operation ................180 Set Fibre Address Operation .................. 181 Set Fibre Topology Operation ................. 181 Set Host Mode Operation ..................182 Parameters for Set IP Address Operation ..............183 Set IP Address Operation ..................183 Set Security Switch Operation .................
Page 18 Set CommandDev Sec Operation ................208 Set FCSP Host Operation ..................209 Set FCSP Port Info Operation .................. 210 Set FCSP Port Switch Operation ................211 Set FCSP Target Operation ..................211 Set Fibre Address ....................212 Output Values to Detailed Info and Addresses of Fibre Channel Port ......212 Set Fibre Topology Operation .................
Page 19 Parameters for Set Ctrl Kind Operation ..............241 Set Prio Port Operation ..................242 Set Prio WWN Operation ..................243 Update Port WWN Operation ................243 Update PerfCtrlGrp Operation ................244 Update WWN Operation ..................245 Parameters for Monitoring S/W Operation .............. 247 Parameters for S/W &...
Page 20 Change CTG Option Operation ................282 Change Option Operation ..................283 Change Pair Option Operation ................284 Parameters for Delete CTG Operation ..............286 Delete Pair Operation .................... 287 Function Switch Operation ..................288 Resume Pair Operation ..................288 Parameters for Script Operation ................289 Script Operation ....................
Page 21 Set Fixed PG Operation ..................317 Set Migration Vol Operation ................... 317 Set Plan Condition Operation ................. 318 Set Reserved Vol Operation ..................319 Attribute Operation ....................321 VTOC Operation ....................322 Set Group Operation .................... 324 Add V-Vol (Snapshot) Operation ................327 Add V-Vol (THP) Operation ..................
Page 23: Introduction
1 Introduction This chapter introduces the audit logs created by the HP StorageWorks XP Remote Web Console computer or SVP (Service Processor) on the storage system. The SVP is a computer that is contained within the storage system. Users can access the audit logs that are output by the SVP, but the SVP is accessible only by HP personnel.
Page 24: Download The Audit Log Information Files To The Remote Web Console Computer
File” on page 36 for more information about the syslog information file. This file contains the audit log. You can download it to your Remote Web Console computer or to a primary or secondary syslog server. Download the Audit Log Information Files to the Remote Web Console Computer Only the storage administrator can download the audit log file, and the Audit Log Administrator Role needs to be set to Modify or View.
Page 25 Transferring the audit log information file could fail due to the failures of either the FTP server or LAN problems even though the configuration of the FTP server has finished. If the transfer fails, the Audit: Warning or the Audit: Wraparound button will remain displayed on the Remote Web Console main window.
Page 26: Transferring The Audit Log Files To Syslog Servers
If you change the configuration in the Audit Log Transfer window (when the items set in the window appear in blue italic letters), click Apply and apply the configuration in the window to the storage system, and then click Transfer. Figure 1 Audit Log Transfer Window Transferring the Audit Log Files to Syslog Servers Audit logs of the storage system can be transferred to a syslog server, the audit log in the same format...
Page 27 Select one of the following: • If using a primary syslog server: • Select Enable in Output to Primary Server. • Enter the IP Address in Primary Server Setting. Do not enter the periods. • Enter the Port Number in Primary Server Setting. You can enter a number from 1 to 65,535.
Page 28: Storing Audit Logs
Confirm that the syslog server is receiving the log of syslog server setting when the setting operation is completed. AuditLog is the function name of the log and Set Syslog Server is the operation name (see “Set Syslog Server Operation” on page 64). If the log is not received by the syslog server, verify that the IP address and the port number set matches with the IP address and the port number of the syslog server.
Page 29: Audit Log File Description
Change to Modify mode. Click Go Security Audit Log Setting in the menu bar of the Remote Web Console main window. The Audit Log Setting window (see Figure 3) displays. Select one of the following for Audit Log Buffer: • Enable to temporarily store audit logs in a system disk before storing the logs in the SVP. •...
Page 30 Component Audit Log Information File Syslog Information File AuditSSSSSYYYYMMDDHHMMSS.tgz SSSSS = serial number File Name YYYYMMDD = date of the transfer When HHMMSS = hour (HH), minute (MM) and Transferred to second (SS) of the transfer the FTP Server The output folder needs to be specified in the Audit Log Transfer window.
Page 31 Component Audit Log Information File Syslog Information File Once the information stored in the audit log information file reaches its maximum capacity, the starting line of the oldest data begins to be overwritten with the starting line of the newest data (wrap around). When you reach 70% of this threshold, the yellow Audit: Warning button appears on the Remote Web Console main window.
Page 32 Introduction...
Page 33: Audit Log File Format
2 Audit Log File Format This chapter describes the two types of audit log files and the items included in the files. • Audit Log Information File, page 33 • Syslog Information File, page 36 Audit Log Information File The audit log information file consists of both basic and detailed information about user logins, logouts and disk array configuration change operations.
Page 34 Item Explanation The SLPR number. For storage administrators or commands from the host, the number 99 appears. SLPR number Not output when the operation name is AuditLog and the event name is Create File. Year, month, and day the audit log was created (YYYYMMDD). Date Hour, minute, second and millisecond the audit log was created Time...
Page 35: Symbols Used In Detailed Parameter Information
Item Explanation The end result of your operation or the result of the received commands. Operation result • Normal end. The operation has ended normally. • Error (xxxx-yyyyy). The operation has ended abnormally and an error code appears. • Warning (xxxx-yyyyy). The operation has partly ended abnormally or was canceled during the operation.
Page 36: Syslog Information File
Symbol Definition When there is more than one setting value for one index, the setting values are enclosed by [ ], and separated by a comma (,). Example: CU:LDEV=[0x00:0x00,0x00:0x01,0x00:0x02] Details are enclosed by {}. Example: {Port,Fabric,Connection}=[{1E,ON,FC-AL},{3E,OFF,P-to-P}] Supplementary and additional information for setting values are enclosed by ( ). Example: {VOL(CU:LDEV),Result}={0x00:0x01,Error(xxxx-yyyy)} Syslog Information File The syslog information file includes information about operations performed on the service processor...
Page 37: Items In The Syslog File
Table 4 Items in the Syslog File Item Description The priority according to the following formula, enclosed by brackets (< >): Priority = 8 x Facility + Severity Facility is 1 (fixed). The Severity depends on the type of log information: Priority 4: Error or Warning.
Page 38 Item Description The result of the audit event: • Success: Normal end. The operation has ended normally. • Failed: Error (xxxx-yyyy). The operation has ended abnormally. Result of the audit • Failed: Warning (xxxx-yyyy). The operation has partly ended abnormally event or was canceled during the operation.
Page 39: Syslog Information File Monitoring Threshold
Item Description Identification information for the application is displayed. For more information, Chapter 44 on page 337. This information is output when commands are received from the host. Reserve #2. Not displayed because it is not used. SLPR number. 99 is displayed for commands from the host. The same information contained in the basic information for the audit log information file is also displayed: •...
Page 40 When the information stored in the syslog information file reaches its maximum number of lines, it is overwritten by new information starting at the first line (wrap around system). Since the old information is erased, you should download the syslog information file as needed. For examples of the Audit Log Function and Events in the syslog file, see the following: •...
Page 41: Information Output In The Audit Log Information File
3 Information Output in the Audit Log Information File This chapter shows the relationship between the audit log functions, operations, and option names. • Operation of Remote Web Console and SVP, page 41 • Receiving Command from the Host, page 50 •...
Page 42 Function Name Operation and Page Option Name Environment Setting Operation, page 69 Changing information on the Control Panel window Login Operation, page 70 Login to Remote Web Console Logout Operation, page 70 Logout from Remote Web Console Release HTTP Block Operation, page 71 Changing information on the Release HTTP Blocking window...
Page 43 Function Name Operation and Page Option Name Set SCP Time Operation, page 141 XP for FlashCopy Mirroring V2 Software ESAM Add Quorum Disk ID Operation, page 123 XP External Storage Access Manager Software Del Quorum Disk ID Operation, page 123 Paircreate Operation, page 124 Pairresync...
Page 44 Function Name Operation and Page Option Name MP Install Operation, page 172 M/F DCR (Cache Residency Manager for z/OS) Operation, page 173 New Installation Operation, page 174 Open DCR (Cache Residency Manager) Operation, page 174 Patch Edit Operation, page 175 Release LUSE Operation, page 176 Restore Config.
Page 45 Function Name Operation and Page Option Name Change Host Group Operation, page 203 Change WWN Operation, page 203 Delete Disk Controller (DKC) World Wide Name (WWN) Operation, page 204 Delete Host Group Operation, page 205 Delete Logical Unit (LU) Path Operation, page 205 Delete World Wide Name (WWN) Operation, page 206...
Page 46 Function Name Operation and Page Option Name Restore Data Operation, page 229 Size Change Operation, page 230 Spare Disk Operation, page 231 Switch SVP Operation, page 231 Transfer Config Operation, page 232 Type Change Operation, page 232 Verify Operation, page 233 Verify Stop Operation, page 233 Release Cache/CLPR...
Page 47 Function Name Operation and Page Option Name Add Pair Operation, page 267 Hitachi ShadowImage™ for Mainframe Change Reserve Operation, page 268 Consistency Group (CTG) Operation, page 268 Delete Pair Operation, page 269 Hitachi ShadowImage™ for Mainframe XP for FlashCopy Mirroring V2 Software Initialize Operation, page 270 Hitachi ShadowImage™...
Page 48 Function Name Operation and Page Option Name Delete Consistency Group (CTG) Operation, page 95 Function Switch Operation, page 96 Paircreate Operation, page 96 Pairresync Operation, page 98 Pairsplit-r Operation, page 99 Pairsplit-S Operation, page 100 Add Consistency Group (CTG) TrueCopy for Mainframe Operation, page 279 Add Pair Operation, page 280...
Page 49 Function Name Operation and Page Option Name Journal-Vol Operation (with Add Parameter), page 298 Journal-Vol Operation (with Group-Delete Parameter), page 299 Pair-Option Operation, page 300 R-Cmd. Dev. Operation, page 111 Resume-Pair Operation, page 302 Suspend-Pair Operation, page 303 System-Option Operation, page 305 Ext Stor AddVolume(FIBRE) Operation, page 129...
Page 50: Receiving Command From The Host
Function Name Operation and Page Option Name Shredder End Shredding Operation, page 263 Volume Shredder Set Shredding Operation, page 263 Suspend Shredding Operation, page 264 VSEC Set Group Operation, page 323 Volume Security VVOL Add V-Vol (Snapshot) Operation, page 327 XP Snapshot Add V-Vol (THP) Operation, page 328...
Page 51: Dka Encryption License Key Operation
DKA Encryption License Key Operation Table 8 shows the function name and the operation name concerning the encryption key used for DKA Encryption License Key. The functions in Table 8 are listed in alphabetical order. For details about the function name and the operation name shown in Table 8, see Chapter 45...
Page 52 For an output example about the function name and the event name shown in Table 10, see Chapter on page 53. Information Output in the Audit Log Information File...
Page 53: Sample Audit Logs Of Remote Web Console Pc And Svp Operations
4 Sample Audit Logs of Remote Web Console PC and SVP Operations This chapter includes a sample audit log for each function and operation that can be performed with the Remote Web Console. The individual items in each sample log are described, starting with function name.
Page 54 Sample Audit Logs of Remote Web Console PC and SVP Operations...
Page 55: Account Function
5 Account Function Set User Account Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Account],Set User Account,,Normal end,,,Seq=xxxxx +Operation=Change +{UserID,Authority,SLPRNo,WritePermission,ReadPermission,AccountFlag}= -[{use001,Administrator,65535,FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF,-,Enable}, -{use002,User,1,-,-,Disable}]Num. of Users=2 [Account] Account function Set User Account Set User Account operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 56: Bit Position And The Relationship Between Function Name And R/W Permission
Item Description The read permission for each function appears as a hexadecimal character string. If a hexadecimal number is indicated for the binary number, a bit position will describe the ReadPermission relationship between each function and its read permissions. (see Table 12).
Page 57 Bit Position Function Name Permission of Remarks in Binary Storage Partition (descending order) Administrator 112-106 Not used 3, 2 Universal Volume Manager 104-98 Not used 3, 2 Data Retention Utility 96-77 Not used Not used 3, 2 Volume Retention Manager 3, 2 Volume Security 3, 2...
Page 58: Set Login Message Operation
Bit Position Function Name Permission of Remarks in Binary Storage Partition (descending order) Administrator 3, 2 LUSE 16-12 Not used 3, 2 Authentication 3, 2 Port 3, 2 LUN Manager Permission of Audit Log Permission of Account Not used Status Port Status Yes (for read permission 3, 2...
Page 59: Set Login Message Operation
Detailed information displays for this operation, as shown in Table Table 13 Set Login Message Operation Item Description Indicates the sentence of login Message displayed on the login window LoginMessageSentence of Remote Web Console. XP24000/XP20000 Audit Log User and Reference Guide...
Page 60 Account Function...
Page 61: Audit Log Function
6 Audit Log Function Audit Log Buffer user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog],Audit Log buffer,,Normal end,,, Seq.=xxxxx +{Option,Set,Result}=[{Audit Log buffer,Enable,Normal}],Num. of Modes=1 [Audit Log] Audit Log function Audit Log buffer Audit Log buffer operation Normal end The operation has ended normally. Seq. =xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 62: Dkcauditlog Was Lost
Create File event AuditLog This parameter indicates the audit log information file has been reproduced. Warning The operation has partly ended abnormally or was canceled during the operation. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) DKCAuditLog was lost user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog],DKCAuditLog was lost,, Error,,,Seq.=xxxxx [Audit Log]...
Page 63: Set Ftp Server Operation
This information displays in the syslog information file only. No parameters display for this event. [Audit Log] Audit Log function Over Threshold Over Threshold event Normal end The operation has ended normally. Set FTP Server Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog], Set FTP Server,,Normal end, Seq.=xxxxx +{ServerType,IPAddrVer,OutFlg,SrvAddr,UserName,OutputDir}=[{Primary,IPv4,Disable, 192.168.0.1,root,/Data/AuditLog},...
Page 64: Set Syslog Server Operation
Item Description The user name to login to the FTP server. If the setting has not changed, a hyphen (-) is UserName displayed. The directory in the FTP server that the transferred audit log information files are stored. OutputDir If the setting is not changed, a hyphen (-) is displayed. Set Syslog Server Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Audit Log],Set Syslog Server,DetailFlg=Enable,Normal end,,,Seq.=xxxxx +DetailFlg=Enable...
Page 65: Sim Complete Operation
Item Description The syslog server to which information is output. Not output when setting is not changed. ServerType Primary: Primary syslog server. Secondary: Secondary syslog server. The version number of the internet protocol. If the setting is not changed, a hyphen (-) is displayed.
Page 66 Audit Log Function...
Page 67: Base Function
7 BASE Function Certificate Update Operation user-name.xx,YYYY/MM/DD:HH:MM:SS.xxx,00:00,[BASE],Certificate Update,,Normal end,,, Seq.=xxxx +{File Name,Result}=[{server.crt,Normal end},{server.key,Error(XXX-XXXX)}] [BASE] BASE function Certificate Update Certificate Update operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 19 Certificate Update Operation Item...
Page 68: Control Panel Restore Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 20 Control Panel Backup Operation Item Description File Name Name of the backup file Result of the backup operation Result Normal end: normal end, Error (xxxx-yyyy): Abnormal end, -: not selected...
Page 69: Delete Cvae Info Operation
Delete CVAE Info Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[BASE],Delete CVAE Info,,Normal end,,, Seq.=xxxxx +{ID}=[{0,1,2,3},Num of IDs=4 [BASE] BASE function Delete CVAE Info Delete CVAE Info operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 22 Delete CVAE Info Operation...
Page 70: Login Operation
Detailed information displays for this operation, as shown in Table Table 23 Environment Setting Operation Item Description RMI time-out RMI time-out period RMI time-out for Modify RMI time-out period for Modify Polling period for lock The polling period for checking exclusive lock Polling period for obstacles The polling period for checking obstacle statuses Hidden Option...
Page 71: Release Http Block Operation
BASE function Logout Logout operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 25 Logout Operation Item Description The IP address of the connected client (Ipv4 or Ipv6). However, IPv4 address may be IPAddr indicated in an mixed environment of IPv4 and IPv6.
Page 72: Set Cvae Info Operation
Set CVAE Info Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BASE],Set CVAE Info,,Normal end,,,Seq.=xxxxxx +{ID,ProductName,VersionInfo,IPAddress,RegistryDate,LastAccessDate,MemoRandom}= -{1,DevMgr,6.0.0.-00,10.213.38.210,01/23/2008 12:34:56,01/24/2008 16:54:02,MEMO SPACE},Num of CVAEInfo=1 +{LicenseInfo}={Core license,Full licence,Expired},Num of LicenseInfos=3 [BASE] BASE function Set CVAE Info Set CVAE Info operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 73: Set Up Http Block Operation
[BASE] BASE function Set System Info Set System Information operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 28 Set System Info Operation Item Description Name...
Page 74: Storage Device Add Operation
Item Description Result of the HTTP Block setting Result Normal end: normal end, Error (xxxx-yyyy): Abnormal end xxxx: part code, yyyy: error code Storage Device Add Operation user-name.xx,YYYY/MM/DD:HH:MM:SS.xxx,00:00,[BASE], Storage Device Add,,Normal end,,, Seq.=xxxx +{No,NickName,ProductName,SerialNo,HostName or IPAddress,Location,HTTP Block}= {1,nickname,H20000,12345,127.0.0.1,Blocked} [BASE] BASE function Storage Device Add Storage Device Add operation Normal end...
Page 75: Storage Device Edit Operation
+{No,NickName,ProductName,SerialNo,HostName or IPAddress,Location,HTTP Block}= {1,nickname,H20000,12345,127.0.0.1,Blocked} [BASE] BASE function Storage Device Del Storage Device Del operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 31 Storage Device Del Operation Item...
Page 76: Storage Device Edit Operation
Detailed Information Detailed information displays for this operation, as shown in Table Table 32 Storage Device Edit Operation Item Description Item number NickName The nickname of the storage system ProductName The product name of the storage system SerialNo The serial number of the storage system HostName or IPAddress The host name or IP address for the storage system Location...
Page 77: Xp Business Copy Software Function
8 XP Business Copy Software Function Change Reserve Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BC],Change Reserve,,Normal end,,,Seq.=xxxxx +Attribute=Set ++{VOL(LDKC:CU:LDEV),Result}=[{0xZZ:0xXX:0xYY,Normal end},{0xZZ:0xXX:0xYY, Error(xxxx-yyyy)}],Num. of Vols=2 [BC] HP XP Business Copy Software function Change Reserve Change Reserve operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 78: Option Operation
HP XP Business Copy Software function Initialize Initialize operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[BC],Option,,Normal end,,,Seq.=xxxxx +Swap & Freeze=Enable,HOST I/O Performance=Enable,Reserve03=Enable,(snip), Reserve32=Disable [BC] HP XP Business Copy Software function Option Option operation Normal end...
Page 79: Pairresync Operation
HP XP Business Copy Software function Pair Create Pair Create operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 35 Pair Create Operation Item Description The set copy speed...
Page 80: Pairsplit Operation
Detailed information displays for this operation, as shown in Table Table 36 Pairresync Operation Item Description The set copy speed Copy Pace Faster: High speed, Medium: Medium speed, Slower: Low speed The type of resynchronization Normal Copy: Normal resynchronization, Quick Resync: High speed Resync Type resynchronization, Reserve Copy: Reverse resynchronization, Quick Restore: High speed restore...
Page 81: Pairsplit-E Operation
Detailed information displays for this operation, as shown in Table Table 37 Pairsplit Operation Item Description The set copy speed Faster: High speed Copy Pace Medium: medium speed Slower: Low speed The split type Split Type Quick Split: Pair split by background copy Steady Split: Pair split by update copy P-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the primary volume in the split pair...
Page 82: Pairsplit-S Operation
Item Description S-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the secondary volume in the suspended pair The result of operation Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of suspended pairs Pairsplit-S Operation Example 1 (HP XP Business Copy Software is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BC],Pairsplit-S,,Normal end,,,Seq.=xxxxx...
Page 83: Cache Function
9 Cache Function Cache Residency Manager (DCR) Prestaging Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cache],DCR Prestaging,, Normal end,,,Seq.=xxxxx [Cache] Cache function DCR Prestaging DCR Prestaging operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Cache],Delete M/F DCR,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,Start CC-HH,End CC-HH}=[{0x00:0x00:0x00,XXXXXX-XX,XXXXXX-XX},...
Page 84: Delete Open Cache Residency Manager (Open Dcr) Operation
Detailed information displays for this operation, as shown in Table Table 40 Delete M/F DCR Operation Item Description The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where LDKC:CU:LDEV the setting information for Cache Residency cache is canceled. The starting cylinder number (CC) and the starting head number (HH) of the cancelled Start CC-HH data.
Page 85: Set Cache Residency Manager For Z/Os (M/F Dcr) Operation
Set Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cache],Set M/F DCR,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,Mode,Prestaging,Start CC-HH,End CC-HH}=[{0x00:0x00:0x00,Bind,No, XXXXXX-XX,XXXXXX-XX},{0x00:0x00:0x00,Priority,Yes,XXXXXX-XX,XXXXXX-XX}],Num. of LDEVs=2 [Cache] Cache function Set M/F DCR Set M/F DCR operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 86: Set Open Dcr Operation
Set Open DCR Set Open DCR operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 43 Set Open DCR Operation Item Description The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where the...
Page 87: 10 Configuration File Loader (Cfl) Function
10 Configuration File Loader (CFL) Function LUN Manager (LUNM) Operation The Configuration File Loader log appears in the log file line. It is located between where the line contains “Start” and the line contains “End.” user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CFL],LUNM Operation,Start,Normal end,,,Seq.=xxxxx [CFL] Configuration File Loader function LUNM Operation LUN Manager operation...
Page 88: Parameters For Vrm Operation
Start Start is the selected parameter. This operation uses the following parameters, as shown in Table Table 45 Parameters for VRM Operation Parameter Description Start Start of the Configuration File Loader. End of the Configuration File Loader. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Configuration File Loader (CFL) Function...
Page 89: 11 Cfl Extension Function
11 CFL Extension Function CflSet Start Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[CFL Extension],CflSet Start,,Normal end,,,Seq=xxxxx +{Input,Output}={C:\Set_IN.spd,C:\Set_OUT.spd} [CFL Extension] CFL Extension function CflSet Start Operation CflSet Start operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 46 CflSet Start Operation...
Page 90 Sequence number of log information (0000000000 to 4294967295) CFL Extension Function...
Page 91: 12 Xp Continuous Access Software Function
12 XP Continuous Access Software Function Add Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Add CTG,,Normal end,,,Seq.=xxxxx +{LDKC,CTG,Path,Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}= {0x00,0x00,Fibre,090,Enable,05,05} [Cnt Ac] HP XP Continuous Access Software function Add CTG Add Consistency Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 92: Change Async Option Operation
Change Async Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Change Async Option,,Normal end,,,Seq.=xxxxx +{CLPR,Rate(%),Delay Start(%),Delay Increase(%)}={00,050,030,040} [Cnt Ac] HP XP Continuous Access Software function Change Async Option Change Async Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 93: Change Option Operation
Detailed Information Detailed information displays for this operation, as shown in Table Table 49 Change CTG Option Item Description LDKC The LDKC number. The consistency group number of the consistency group (CT group) where the option is changed. Offloading(s) The value set to the monitoring time of transfer to the side file. The unit is second. Indicates whether the inflow control to the cache is enabled or disabled.
Page 94: Change Pair Option Operation
Item Description Path Blockade The path blockade watch period set. The unit is second. Watch(s) Path Blockade SIM The path blockade SIM watch period set. The unit is second. Watch(s) Indicates whether the remote copy related SIM is reported or not. Service SIM Report, Not Report Indicates whether the parallel operation of initial copy by CU is enabled or not.
Page 95: Delete Consistency Group (Ctg) Operation
Detailed information displays for this operation, as shown in Table Table 51 Change Pair Option Operation Item Description P-VOL The port number, host group number and LUN of the primary volume where the pair (Port-G-ID-LUN) option is changed sequentially. The changed fence level (the condition that MCU rejects Write to the primary volume). Fence Level Never: No condition, Data: S-VOL data, Status: S-VOL status The error level changed (handling if trouble occurs).
Page 96: Function Switch Operation
Function Switch Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Function Switch,,Normal end,,,Seq.=xxxxx + Switch=0001 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 [Cnt Ac] HP XP Continuous Access Software function Function Switch Function Switch operation Normal end The operation has ended normally.
Page 97: Paircreate Operation
Detailed information displays for this operation, as shown in Table Table 54 Paircreate Operation Item Description The port number, host group number, and LUN of the volume specified to the primary P-VOL (Port-G-ID-LUN) volume when the pair is created sequentially The port number, host group number, and LUN of the volume specified to the S-VOL (Port-G-ID-LUN) secondary volume when the pair is created sequentially...
Page 98: Pairresync Operation
Pairresync Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Pairresync,,Normal end,,,Seq.=xxxxxx +{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Fence Level,Copy Pace,Priority,Range, Error Level,Change ESAM,Quorum Disk ID,Result}= -{1A-0x00-0x000,1B-0x00-0x000,Never,15,256,-,-,Yes,0x7F,Normal End}, {1A-0x00-0x001,1B-0x00 0x001,Never,15,256,Group,Group,No,-,Normal End},(snip) -(snip), Num. of Pairs=xx [Cnt Ac] HP XP Continuous Access Software function Pairresync Pairresync operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 99: Pairsplit-R Operation
Item Description The quorum disk ID that the ESAM pair uses. This value is output only when Change Quorum Disk ID ESAM is Yes. The result of operation. Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num.
Page 100: Pairsplit-S Operation
Item Description The suspend type set Kind P-VOL Failure: Writing to the P-VOL is disabled S-VOL: Writing to the P-VOL is enabled The suspend rage set. This value is output when the asynchronous pair is split only. Range Group: Group (all asynchronous pairs in the consistency group), LU: LU (specified asynchronous pair only) The setting of unreflected data handling.
Page 101 Item Description The port number, host group number, and LUN of the secondary volume in the S-VOL (Port-G-ID-LUN) deleted pair sequentially The volume type of the volume on the primary site Type P-VOL: Primary volume, S-VOL: Secondary volume The setting for forced pair deletion Force Yes: Pair is deleted even when MCU cannot communicate with RCU No: Pair is deleted when MCU can change the pair status to SMPL only...
Page 102 XP Continuous Access Software Function...
Page 103: Xp Continuous Access Journal Software Function
13 XP Continuous Access Journal Software Function Journal-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac-J],Journal-Option,,Normal end,,,Seq.=xxxxx +{LDKC,JNLG,MetaData Ratio,Extent,Data Overflow Watch(s),Inflow Control,Copy Pace, Path Watch Time,Forward Path Watch Time,Use of Cache,Speed of Line(Mbps), Delta resync Failure,Result}={0x00,0x00,32,32,20,No,150,30,Yes,Not Use,256,Entire, Normal end}, -{0x00,0x01,32,32,20,No,150,30,No,Use,256,Entire,Normal end},Num. of JNL Grps=2 [Cnt Ac-J] HP XP Continuous Access Journal Software function Journal-Option...
Page 104: Journal-Vol Operation (Add Parameter)
Item Description Copy Pace The speed of initial copy. 150: Low speed. 500: Medium speed. 1500: High speed The path blockade watch period set. Path Watch Time The unit is minutes, hours or days. If it is set to 30 minutes, it will be 30 (min.). Whether to transfer the path blockade watch period set to the master journal group to Forward Path the restore journal group.
Page 105: Journal-Vol Operation (Group-Delete Parameter)
Parameter Description Delete The journal volume is deleted. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed information Detailed information displays for this operation, as shown in Table Table 60 Journal-Vol (Add Parameter) Operation Item Description LDKC...
Page 106: Paircreate Operation
Detailed information displays for this operation, as shown in Table Table 61 Journal-Vol (Group-Delete Parameter) Operation Item Description LDKC The LDKC number that the journal group belongs. JNLG The journal group number. The result of operation. Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num.
Page 107: Pairresync Operation
Item Description Priority The priority of copy The consistency group ID Indicates whether initial copy or paircreate operation for Delta resync is executed or Initial Copy Entire: execute initial copy, None: do not execute initial copy, Delta: execute paircreate operation for Delta resync M-JNLG The master journal group R-JNLG...
Page 108: Pairsplit-R Operation
Detailed information displays for this operation, as shown in Table Table 63 Pairresync Operation Item Description P-VOL (Port-G-ID-LUN) The port number, host group number, and LUN of the primary data volume S-VOL (Port-G-ID-LUN) The port number, host group number, and LUN of the secondary data volume MirrorID The mirror ID The serial number of the logical device (storage system)
Page 109: Pairsplit-S Operation
Pairsplit-r operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 64 Pairsplit-r Operation Item Description P-VOL (Port-G-ID-LUN) The port number, host group number, and LUN of the primary data volume S-VOL (Port-G-ID-LUN) The port number, host group number, and LUN of the secondary data volume MirrorID...
Page 110: Pair-Option Operation
Pairsplit-S operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 65 Pairsplit-S Operation Item Description P-VOL The port number, host group number and LUN of the primary data volume. (Port-G-ID-LUN) S-VOL The port number, host group number and LUN of the secondary data volume.
Page 111: R-Cmd. Dev. Operation
Pair-Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 66 Pair-Option Operation Item Description P-VOL The port number, host group number and LUN of the primary data volume. (Port-G-ID-LUN) S-VOL The port number, host group number and LUN of the secondary data volume.
Page 112: System-Option Operation
Assign is selected as the parameter. The operation uses the following parameters as shown in Table Table 67 Parameters for R-Cmd.Dev. Operation Item Description Assign The remote command device is assigned. Release The remote command device is released. Normal end The operation has ended normally.
Page 113: System-Option Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 69 System-Option Operation Index Description Max Initial Copy Indicates the number of volumes that can be copied at a time by one initial copy. No detailed information.
Page 114 XP Continuous Access Journal Software Function...
Page 115: Xp For Compatible Parallel Access Volumes (Cpav) Software Function
14 XP for Compatible Parallel Access Volumes (CPAV) Software Function Add Alias Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CPAV],Add Alias,,Normal end,,,Seq.=xxxxx +LDKC=0x00,CU=0x00 ++{Alias LDEV,Base LDEV}=[{0xFD,0x00},{0xFE,0x00},{0xFF,0x01}],Num. of Alias LDEVs=3 +LDKC=0x00,CU=0x01 ++{Alias LDEV,Base LDEV}=[{0xFF,0x00}],Num. of Alias LDEVs=1 +Num. of Alias LDEVs=4 [CPAV] CPAV function Add Alias Add Alias operation Normal end The operation has ended normally.
Page 116: Delete Alias Operation
Delete Alias Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CPAV],Delete Alias,,Normal end,,,Seq.=xxxxx +LDKC=0x00,CU=0x00 ++{Alias LDEV,Base LDEV}=[{0xFD,0x00},{0xFE,0x00},{0xFF,0x01}],Num. of Alias LDEVs=3 +LDKC=0x00,CU=0x01 ++{Alias LDEV,Base LDEV}=[{0xFF,0x00}],Num. of Alias LDEVs=1 +Num. of Alias LDEVs=4 [CPAV] HP XP for Compatible Parallel Access Volumes Software function Delete Alias Delete Alias operation Normal end The operation has ended normally.
Page 117: 15 Data Retention Utility Function
15 Data Retention Utility Function Attribute Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Data Ret],Attribute,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,Attribute,RT,Result}=[{0x00:0x00:0x01,0x80,100,Normal end}, {0x00:0x00:0x02,0x82,Unlimited,Error(9605-8122)},{0x00:0x00:0x03,0x81,200, Normal end}, {0x00:0x00:0x03,0x81,xxxx,Normal end}],Num. of LDEVs=XXX [Data Ret] Data Retention Utility function Attribute Attribute operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 118: Expiration-Lock Operation
Item Description The number of days set in Retention Term. A hyphen (-) is output when setting is not changed. The result of operation. Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of LDEVs The number of the logical volumes where the attribute has been set.
Page 119: 16 Xp Disk/Cache Partition Function
16 XP Disk/Cache Partition Function Set Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[DCPart],Set,,Normal end,,,Seq.=xxxxxx +Delete SLPR=[xx,xx],Num. of SLPRs=xx +Delete CLPR=[xx,xx],Num. of CLPRs=xx +SLPR=xx:xxxxxxxxxxxxxx,Operation=xxxxx ++Port=[CLx-x,CLx-x],Num. of Ports=xx ++CU=[0xXX:0xXX,0xXX:0xXX] ,Num. of CUs=xx ++SSID=[0xXXXX,0xXXXX],Num. of SSIDs=xx ++CLPR=xx:xxxxxxxxxxxxxx,Cache(MB)=xxxxx,Cache Residency(MB)=xxxx, Num. of Cache Residency Areas=xxxx +++PG=[xx-xx,xx-xx],Num. of PGs=xx ++Num. of CLPRs=xx +Num.
Page 120 Item Description Num. of Ports The number of ports belonging to SLPR. The LDKC and CU number of the CU belonging to SLPR. Num. of CUs The number of CUs belonging to SLPR. SSID Indicates SSID belonging to SLPR. A space is output if SLPR0. Num.
Page 121: 17 Email Info Function
17 Email Info Function MailAddress Write Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Email Info],MailAddress Write,, Normal end,,,Seq.=xxxxx +{MailServerSetting,MailServer}={HostName,smtp.test.co.jp} +{SMTP AUTH,Account}={Enable,Account} +{FromAddress,ReturnAddress}={TransAddr@co.jp,ReplyAddr@co.jp} +UsedCount=32 ++{ToAddressList,Attribute}=[{usr1@co.jp,TO},{usr2@co.jp,TO},{usr3@co.jp,TO},{usr4@co.jp,CC}, {usr25@co.jp,CC},{usr26@co.jp,BCC},{usr27@co.jp,BCC},{-,-},{-,-},{usr31@co.jp,BCC}], Num. of Accounts=32 [Email Info] Email Info function MailAddress Write MailAddress Write operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 122: Valid Flag Update Operation
Item Description Return mail address. To receive the reply to another mail address, specify the address ReturnAddress by using ReturnAddress. UsedCount The number of the mail addresses that have been registered as a destination. Mail addresses of a destination. Thirty-two addresses are always displayed. ToAddressList If a mail address is not specified, {-,-} is displayed instead of mail address and attribute.
Page 123: Xp External Storage Access Manager Function
18 XP External Storage Access Manager function Add Quorum Disk ID Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ESAM],Add Quorum Disk ID,,Normal end,,, Seq.=xxxxx +{Quorum Disk ID,Paired S/N,Controller ID,Quorum Disk(LDKC:CU:LDEV)}= {0x01,60011,5,0x01:0x02:0x03} [ESAM] XP External Storage Access Manager function Add Quorum Disk ID Add Quorum Disk ID operation Normal end The operation has ended normally.
Page 124: Paircreate Operation
XP External Storage Access Manager function Add Quorum Disk ID Add Quorum Disk ID operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 78 Del Quorum Disk ID Operation Item...
Page 125: Pairresync Operation
Item Description The port number, host group number, and LUN of the volume specified as a S-VOL(Port-G-ID-LUN) secondary volume when the pair is created The serial number of the paired storage system LDKC The LDKC number of the paired storage system The path group ID or SSID of the paired storage system.
Page 126: Pairsplit-R Operation
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 80 Pairresync Operations Item Description The port number, host group number, and LUN of the primary volume in the P-VOL(Port-G-ID-LUN) restored pair The port number, host group number, and LUN of the secondary volume in the...
Page 127: Pairsplit-S Operation
Detailed information displays for this operation, as shown in Table Table 81 Pairsplit-r Operation Item Description The port number, host group number, and LUN of the primary volume in the P-VOL(Port-G-ID-LUN) split pair The port number, host group number, and LUN of the secondary volume in the S-VOL(Port-G-ID-LUN) split pair The volume type of the local volume...
Page 128: Pairsplit-S Operation
Detailed information displays for this operation, as shown in Table Table 82 Pairsplit-S Operation Item Description The port number, host group number, and LUN of the primary volume in the de- P-VOL(Port-G-ID-LUN) leted pair The port number, host group number, and LUN of the secondary volume in the S-VOL(Port-G-ID-LUN) restored pair The volume type of the local volume...
Page 129: 19 Xp External Storage Software Function
19 XP External Storage Software Function AddVolume(FIBRE) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],AddVolume(FIBRE),,),,Normal end,,,Seq.=xxxxx +{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR, Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001, 0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296, E1-1,1,0,OPEN-V,Enable,Disable,Normal end} ++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0001},{2A,50560E8000C3E212,0x0001}, {3A,50560E8000C3E213,0x0001},{4A,50560E8000C3E214,0x0001}],Num. of Paths=4 ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x00:0x00,96000},{0x00:0x00:0x01,96000,0x00D8}], Num. of LDEVs=2 +{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR, Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001, 0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296, E1-1,1,0,OPEN-V,Enable,Disable,Normal end} ++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0002},{2A,50560E8000C3E212,0x0002}], Num. of Paths=2, ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x01:0x00,4294967296,0x00D8}],Num. of LDEVs=1 +Num. of Volumes=2 [Ext Stor] HP XP External Storage Software function AddVolume(FIBRE)
Page 130: Blockpaths(Fibre) Operation
Item Description VolumeID2 The identification character 2 of the mapped external volume Device The device name that the mapped external volume notifies to the host Capa(blocks) The capacity of the mapped external volume indicated by blocks The number of the external volume group and the reference number assigned to the external volume of the mapped external volume.
Page 131: Change-Cachemode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],BlockPaths(FIBRE),,Normal end,,,Seq.=xxxxx +{Port,WWN,Result}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end}, {2A,50560E8000C3E212,Normal end}],Num. of Paths=3 [Ext Stor] HP XP External Storage Software function BlockPaths(FIBRE) BlockPaths(FIBRE) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 84 BlockPaths(FIBRE) Operation...
Page 132: Changepaths(Fibre) Operation
Parameter Description Disable The cache memory is not used. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 86 Change-CacheMode Operation Item Description Group...
Page 133: Checkpaths(Fibre) Operation
Detailed information displays for this operation, as shown in Table Table 87 ChangePaths(FIBRE) Operation Item Description The number of the external volume group and the reference number assigned to the external volume of the external volume that the mapping path configuration has been ExGroup changed.
Page 134: Chkpath-Restorevol Operation
Detailed Information Detailed information displays for this operation, as shown in Table Table 88 CheckPaths(FIBRE) Operation Item Description Port The port name of the external port of the local storage system. The WWN of the Target port of the external storage system. The result of operation.
Page 135: Deletevolume(Fibre) Operation
Item Description Num. of Groups The number of external volumes resumed. DeleteVolume(FIBRE) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],DeleteVolume(FIBRE),,Normal end,,,Seq.=xxxxx +{ExGroup,Mode,Result}=[{E1-1,Force,Normal end},{E1-2,Force,Normal end}, {E1-3,Normal,Normal end}],Num. of Volumes=3 [Ext Stor] HP XP External Storage Software function DeleteVolume(FIBRE) DeleteVolume(FIBRE) operation (delete volume) Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 136: Disconnect-Volume Operation
Disconnect-Volume Operation If this operation is performed from Remote Web Console, this logged information indicates that the Disconnect-Volume operation was only requested, but not finished. However, if this operation is performed from CFL Extension (or if this logged information appears between the CflSet Start operation and the CflSet End operation), this logged information indicates that the Disconnect-Volume operation was finished.
Page 137: Inflow-Control Operation
DividePathGroup operation Normal end The operation has ended normally. Seq.=xxxxxx Serial number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 92 DividePathGroup Operation Item Description PathGroup The path group number of the original path group. NewPathGroup The path group number of a newly created path group.
Page 138: Unitepathgroup Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table Table 94 Inflow-Control Operation Item Description Group External volume group number for the executed setting operation. The result of operation. Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code...
Page 139: Wwntimer Operation
Item Description Num. of PathGroups The number of the path groups merged. WwnTimer Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],WwnTimer,,Normal end,,,Seq.=xxxxxx +{WWN,I/O-TOV,Quedepth,LinkDown,Result}=[{50060E8000C3E214,15,8,180,Normal End}, {50060E8000C3E214,15,8,180,Error(605-3003)},{50060E8000C3E214,15,8,180,Normal End}, Num of WWNs=XXX [Ext Stor] HP XP External Storage Software function WwnTimer WwnTimer operation (World Wide Name) Normal end The operation has ended normally.
Page 140 XP External Storage Software Function...
Page 141: 20 Flashcopy (Fc) Function
20 FlashCopy (FC) Function Set SCP Time Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[FC],Set SCP Time,,Normal end,,,Seq.=xxxxx +{LDKC,CU,SCP Time(s)}= -[{0x00,0x00,600},{0x00,0x01,600},{0x00,0x02,600},{0x00,0x03,600},{0x00,0x04,600}, (snip), {0x00,0xFE,600}],Num. of CUs=255 [FC] FlashCopy function Set SCP Time Set State Change Pending (SCP) Time operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in...
Page 142 FlashCopy (FC) Function...
Page 143: 21 Information Function
21 Information Function Delete Log Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],Delete Log,SIM,Normal end,,,Seq.=xxxxx [Information] Information function Delete Log Delete Log operation SIM is the selected parameter. This operation uses the following parameters, as shown in Table Table 98 Parameters for Delete Log Operation Parameter Description The deletion of SIM log.
Page 144: Orm Value Operation
ORM Value Operation Example 1 (changing the threshold of FC/SATA) user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],ORM Value,Alter,Normal end,,,Seq.=xxxxx +Type=7days +{Read Err.(Unrecovered),Read Err.(Recovered),Seek Err.(Recovered),Seek Err. (Unrecovered), Not Ready,Other Errors}={15,1.00e-008,100,10,10,10} ++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152 Example 2 (changing the threshold of a solid state drive) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Information],ORM Value,Alter,Normal end,,, Seq.=xxxxx +Type=Total +{Total Defect Count}={15}...
Page 145: Sim Complete Operation
Detailed information displays for this operation, as shown in Table 100. Table 100 ORM Value Operation Item Description The period of time to acquire the result of threshold diagnosis using the read diagnosis function. Type Today: Current day only, 7 days: 7 days, Total: Every operating days Read Err.
Page 146: Sim Reporting Option Operation
Detailed information displays for this operation, as shown in Table 101. Table 101 SIM Complete Operation Item Description Reference Code The SIM reference code of the error and service request. Num. of Reference The number of SIM reference codes. Codes SIM Reporting Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],SIM Reporting Option,,Normal end,,,Seq.=xxxxx +Type=DKC SIM...
Page 147: Threshold Value Operation
Item Description Report service level information as SIM. Service ON: Report, OFF: Do not report Num. of Types The number of information levels to be reported as SIM. Threshold Value Operation Example 1 user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],Threshold Value,Alter,Normal end,,,Seq.=xxxxx +Type=7days +{Mechanical error(Recovered,Unrecd.),Media error(Recovered,Unrecd.), Read/Write error(Recovered,Unrecd.),Drive I/F error(Recovered,Unrecd.), Controller hardware error(Recovered,Unrecd.),FC I/F error Port 0(Unrecd.), FC I/F error Port 1(Unrecd.),Port 0 error(Unrecd.),Port 1 error(Unrecd.)}...
Page 148: Threshold Value Operation (Example 1)
Detailed information displays for this operation, as shown in Table 104. Table 104 Threshold Value Operation (Example 1) Item Description The period of time to acquire the result of threshold diagnosis using the read diagnosis function. Type 7 days: 7 days, Total: Every operating days Mechanical error The threshold of Mechanical error.
Page 149: 22 Install Function
22 Install Function Add Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Add Host Group,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,HostGrpName,Mode,Option[0:31],Option[32:63],Option[64:95]}={XX, 0xXXX,XXXXXXXXXXXXXXXX,0xXX,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX} ++{WWN,Nickname}=[{0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},{0xXXXXXXXXXXXXXXXX, XXXXXXXXXXXXXXXX}],Num. of WWNs=2 +{Port,HostGrpID,HostGrpName,Mode,Option[0:31],Option[32:63],Option[64:95]}={XX, 0xXXX,XXXXXXXXXXXXXXXX,0xXX,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX} +Num. of Host Groups=2 [Install] Install function Add Host Group Add Host Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 150: Add Lu Path Operation
Item Description Num. of WWNs The number of WWNs of the host registered in the host group. Num. of Host The number of added host groups. Groups Add LU Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Add LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX,0xXXX,0xXXX, 0xXX:0xXX:0xXX},{XX,0xXXX,0xXXX, 0xXX:0xXX:0xXX},{XX,0xXXX,0xXXX,0xXX:0xXX:0xXX}],Num. of Paths=3 [Install] Install function Add LU Path...
Page 151: All Config Operation
Add WWN operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 107. Table 107 Add WWN Operation Item Description Port The name of the port where the host group is created.
Page 152: Assist Config Operation
Assist Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Assist Config,,Normal end,,,Seq.=xxxxx +{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx} [Install] Install function Assist Config Assist Config operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 109.
Page 153: Change Host Group Operation
Detailed information displays for this operation, as shown in Table 110. Table 110 Backup Config Operation Item Description Ver. The version number of the configuration information to be backed up. Change Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Change Host Group,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,HostGrpName}=[{XX,XXX,XXXXXXXXXXXXXXXX},{XX,XXX,XXXXXXXXXXXXXXXX}], Num.
Page 154: Cache Residency Manager (Dcr) Prestaging Operation
Change WWN operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 112. Table 112 Change WWN Operation Item Description Port The name of the port where the host is connected.
Page 155: Delete Disk Controller (Dkc) Wwn Operation
Define Config. Define Config. operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete Disk Controller (DKC) WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Delete DKC WWN,,Normal end,,,Seq.=xxxxx +{Port,Delete WWN}=[{XX,0xXXXXXXXXXXXXXXXX},{XX,0xXXXXXXXXXXXXXXXX}], Num. of WWNs=2 [Install] Install function Delete DKC WWN Delete DKC WWN operation Normal end...
Page 156: Delete Lu Path Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 114. Table 114 Delete Host Group Operation Item Description Port The name of the port where the host group deleted or initialized was created. HostGrpID The host group number deleted or initialized.
Page 157: Delete Wwn Operation
Item Description Num. of Paths The number of LU paths deleted Delete WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Delete WWN,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,WWN}=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX},{XX,0xXXX,0xXXXXXXXXXXXXXXXX}], Num. of WWNs=2 [Install] Install function Delete WWN Delete WWN operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 158: Force Reset Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 117. Table 117 DKU Emulation Operation Item Description Type The emulation type LDEV(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers where the emulation type is changed Num.
Page 159: Format Stop Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Format,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) +PG=[V1-1],Num. of PGs=1 (for a virtual volume) +PG=[X1-1],Num. of PGs=1 (for a Dynamic Provisioning volume) +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Install] Install function Format Format operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 160: Initialize Orm Value Operation
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 120. Table 120 Format Stop Operation Item Description The parity group number. Num. of PGs The number of parity groups. LDEV The LDEV number.
Page 161: Install Operation (Installing Additional Channel Adapters)
+{CHA,Kind}={CHA-2WU, 8M MFibre 4ch-4mp}, ++{Port,HTP/FNP,CU Number,Emulation}=[{AN,HTP,00:00-00:3F,H-6591-2}, {CN,HTP,00:00-00:3F,H-6591-2}, {EN,HTP,00:00-00:3F,H-6591-2},{GN,HTP,00:00-00:3F,H-6591-2}],Num. of Ports=4 +Num. of CHAs=4 [Install] Install function Install Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 121.
Page 162: Parameters For Install Operation (Installing Additional Channel Adapters)
{DKA-2NL,DKF 4MP,4}],Num. of DKAs=4 +{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1 +FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U,FSWR18-L, FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U],Num. of FSWs=16 +{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-1,RAID1 (2D+2D), DKR2F-J300FC,OPEN-V,3-3,Disable}, ++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x00,OPEN-V,1125767168, LBA,Disable,0x0009}],Num. of LDEVs=1 +{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-2,RAID5 (3D+1P), DKR2F-J300FC,OPEN-V,-,Disable}, ++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x10,OPEN-V,1688650752, LBA,Disable,0x0009}],Num. of LDEVs=1 +{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-3,RAID1 (2D+2D), DKR2F-J300FC,OPEN-V,3-1,Disable}, ++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x01,OPEN-V,1125767168, LBA,Disable,0x0009}],Num.
Page 163: Install Operation (Installing Additional Subsystems, Ecc Groups Or Ldevs)
Detailed information displays for this operation, as shown in Table 123. Table 123 Install Operation (Installing Additional Subsystems, ECC Groups or LDEVs) Item Description Disk Adapter (DKA) The Disk Adapter (DKA) mounting location Kind The type of Disk Adapter (DKA) Transfer Rate The transfer rate of Disk Adapters (DKA) Num.
Page 164: Install Operation (Installing Additional Cache Memory)
Item Description The B4 number SPARE The spare drive number Num. of SPAREs The number of spare drives NOTE: Only the changed items will be output. The Detailed Information for the recovery process will not be output when the installation process executed before the process has finished. However, the setting of the recovery process will be output as the Detailed information for the process when the installation process executed before the recovery process has not finished.
Page 165 Item Description DCR available size The capacity of Cache Residency. CLPR The CLPR number. Cache size The capacity of the cache memory allocated to CLPR. DCR size The capacity of Cache Residency allocated to CLPR. Extent Number The number of extents allocated to CLPR. Num.
Page 166: Install Operation (Installing Additional Shared Memory)
Detailed information displays for this operation, as shown in Table 125. Table 125 Install Operation (Installing Additional Shared Memory) Item Description The mounting location of the PCB for shared memory. Slot The slot position of the shared memory module. Size The capacity of the cache memory module.
Page 167: Install Cv Operation
Detailed information displays for this operation, as shown in Table 126. Table 126 Install Operation (Installing Additional Power Supply) Item Description Redundant Power The installed additional cluster power supply. Supply Num. of Redundant The number of additional cluster power supplies. Power Supplies Example 6 (installing additional battery) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx...
Page 168: Parameters For Install Cv Operation
0x00:0x00:0x00, -,OPEN-V,10000,LBA,Disable,0x0005}],Num. of LDEVs=1 [Install] Install function Install CV Install CV operation No parameter No parameter is selected in the above example. This operation uses the following parameters, as shown in Table 128. Table 128 Parameters for Install CV Operation Parameter Description No parameter...
Page 169: Machine Install Date Operation
Item Description The setting status of system disk System Disk Disable or Enable will appear. SSID The subsystem ID Num. of LDEVs The number of LDEVs Machine Install Date Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Machine Install Date,,Normal end,,,Seq.=xxxxx +Date=YYYY/MM/DD HH:mm [Install] Install function Machine Install Date Machine Install Date operation Normal end...
Page 170: Make Vol./Vol. Init Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 131. Table 131 Make LUSE Operation Item Description The LDKC, CU, and LDEV numbers of several LDEVs combined into a LUSE volume. The LUSE(LDKC:CU:LDEV) number indicated at the beginning represents the LDKC, CU, and LDEV numbers of the top LDEV.
Page 171: Micro Program Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 133. Table 133 Make Vol./Vol. Init Item Description The parity group number LDKC:CU:LDEV The LDKC, CU, and LDEV numbers Emulation...
Page 172: Mp Install Operation
Detailed information displays for this operation, as shown in Table 134. Table 134 Micro Program Operation Item Description The media which the microcode to be exchanged is stored (Floppy disk, CD-ROM, SVP Micro Media HDD, HDD Backup or remote transfer). The method to exchange the microcode.
Page 173: M/F Dcr (Cache Residency Manager For Z/Os) Operation
Item Description Num. of Kind The number of the kind of the installed microcode. Target MP The mounting location of the installed microcode. Num. of MP The number of microcode installed. M/F DCR (Cache Residency Manager for z/OS) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],M/F DCR,,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=0x00:0x00:0x00 ++{Define,Mode,Prestaging,Start CC-HH,End CC-HH}=[{Set,Bind,No,00-00,00-10}, {Set,Priority,Yes,1000-00,1009-14}],{Delete,-,-,1000-00,1009-14}],...
Page 174: New Installation Operation
Item Description Num of DCR The number of Cache Residency which has been set or canceled Settings New Installation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],New Installation,,Normal end,,,Seq.=xxxxx +Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG}, Num. of Kind=7 [Install] Install function New Installation New Installation operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 175: Patch Edit Operation
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 138. Table 138 Open DCR Operation Item Description The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where LDKC:CU:LDEV Cache Residency is set The setting status of Cache Residency...
Page 176: Release Luse Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 139. Table 139 Patch Edit Operation Item Description Block The block number. The file information. File Old: old data, New: new data. Entry The entry number.
Page 177: Restore Config. Operation
Detailed information displays for this operation, as shown in Table 140. Table 140 Release LUSE Operation Item Description The LDKC, CU, and LDEV numbers of several LDEVs that were combined into the released LUSE(LDKC:CU:LDEV) LUSE volume. The number indicated at the beginning represents the LDKC, CU and LDEV numbers of the top LDEV.
Page 178: Set Battery Life Operation
Detailed information displays for this operation, as shown in Table 141. Table 141 Restore Config. Operation (Example 2) Item Description New Ver. The new version number. Old Ver. The old version number. Set Battery Life Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Battery Life,,Normal end,,,Seq.=xxxxx +{Use Battery Life,Date,Remained Life}={Valid,YYYY/MM/DD,610} [Install] Install function...
Page 179: Set Command Device (Commanddev) Operation
Set Channel Speed operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 143. Table 143 Set Channel Speed Operation Item Description Port The name of the port that the channel speed is set.
Page 180: Set Command Device Security (Commanddevsec) Operation
Set Command Device Security (CommandDevSec) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set CommandDevSec,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}], Num. of LDEVs=2 [Install] Install function Set CommandDevSec Set CommandDevSec operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 145.
Page 181: Set Fibre Topology Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 146. Table 146 Set Fibre Address Operation Item Description Port The name of the port that the fibre address has been set. The address of Fibre Channel port after change using a number from 1 to 126.
Page 182: Set Host Mode Operation
Set Host Mode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,Mode,option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX, 0x00,0xXXXXXXXX, 0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}], Num. of Host Groups=2 [Install] Install function Set Host Mode Set Host Mode operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 183: Parameters For Set Ip Address Operation
Install function Set IP Address Set IP Address operation SVP&DKC SVP&DKC is the selected parameter. This operation uses the following parameters, as shown in Table 149. Table 149 Parameters for Set IP Address Operation Parameter Description Change of the IP address for SVP SVP&DKC Change of the IP address for SVP and DKC Normal end...
Page 184: Set Security Switch Operation
Item Description S-SVP Standby SVP details are provided in the format described below. IPv4 (IP Address, Subnet Mask) IPv4 (IP Address: IP address, Subnet Mask: Subnet Mask) IPv6 (IP Address, IPv6 (IP Address: IP Address, Subnet Prefix: Subnet Prefix) Subnet Prefix) Set Security Switch Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Security Switch,,Normal end,,,Seq.=xxxxx +{Port,Switch}=[{XX,Disable},{XX,Enable}],Num.
Page 185: Set Subsystem Time Operation
Set Speed Mode operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 152. Table 152 Set Speed Mode Operation Item Description Channel Adapter The Channel Adapter (CHA) name (name of channel adapter).
Page 186: System Option Operation
Set Subsystem Time Set Subsystem Time operation TOD Change and Synchro. Infor TOD Change is the selected parameter for example 1, and Synchro. Infor is the selected parameter for example 2. This operation uses the following parameters, as shown in Table 153.
Page 187: System Option Operation
+{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1 +{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}],Num. of LDEVs=1 +{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1 +{LPR,Command Control}=[{System,10}],Num. of LPRs=1 +{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1 +Debug Mode=Set [Install] Install function System Option System Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 188: System Tuning Operation
Item Description Power Supply Type The type of AC-BOX. Disk Unit (DKU) The Disk Unit (DKU) mounting location. AC-BOX The type of AC-BOX. Num. of AC-BOXs The number of AC-BOX. LDKC:CU: LDEV The LDKC number, the CU number and LDEV number. Indicates the setting status of Destage.
Page 189: System Tuning Operation
[Install] Install function System Tuning System tuning operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 156. Table 156 System Tuning Operation Item Description Serial No.
Page 190: Uninstall Operation
Item Description LDEV The LDEV number. SSID The subsystem ID. Num of SSIDs The number of subsystem IDs. Uninstall Operation Example 1 (uninstalling a channel adapter (CHA)) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +{CHA,Kind}=[{CHA-2M,16FS Fibre 8ch-4mp},{CHA-2M,16FS Fibre 8ch-4mp}], Num of CHAs=2 [Install] Install function Uninstall Uninstall operation Normal end...
Page 191: Uninstall Operation (Uninstalling A Dka, An Ecc Group Or An Ldev)
Install function Uninstall Uninstall operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 158. Table 158 Uninstall Operation (Uninstalling a DKA, an ECC Group or an LDEV) Item Description Disk Adapter (DKA)
Page 192: Uninstall Operation (Uninstalling A Cache Memory Module)
+DCR available size=1280 +{CLPR,Cache size,DCR size,Extent Number}=[{CLPR0,65536,1280,16384}], Num. of CLPRs=1 +{SM,Slot,Size}=[{1SC/2SD,15,512},{1SC/2SD,16,512}],Num. of SMMs=2 +{Battery,Define}=[{BATTERY-14,Install},{BATTERY-24,Install},{BATTERY-15,Install}, {BATTERY-25,Install}],Num. of Batteries=4 [Install] Install function Uninstall Uninstall operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 159.
Page 193: Uninstall Operation (Uninstalling A Shared Memory Module)
Item Description Battery The mounting location of the battery. Indicates the installation or the uninstallation of the battery. Define Install: Install battery, Uninstall: Uninstall battery. Num. of Batteries The number of batteries. NOTE: Only the changed items will be output. Example 4 (uninstalling a shared memory module) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +{SM,Slot,Size}=[{1SA/2SB,3,0},{1SA/2SB,4,0},{1SC/2SD,9,0},{1SC/2SD,10,0}],...
Page 194: Uninstall Operation (Uninstalling A Power Supply)
Item Description Battery The mounting location of the battery Indicates the installation or the uninstallation of the battery. Define Install: Install battery, Uninstall: Uninstall battery. Num. of Batteries The number of batteries. NOTE: Only the changed items will be output. Example 5 (uninstalling a power supply) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +Redundant Power Supply=[CL Additional Power Supply,CL Additional Power Supply2],...
Page 195: Update Config Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 162. Table 162 Uninstall Operation (Uninstalling a Battery) Item Description The operation when power supply is lost. Power Lost Mode Memory Backup Mode: Set to Memory Backup Mode Destage Mode: Set to Destage Mode...
Page 196: Volume To Space Operation
Volume to Space Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Volume to Space,,Normal end,,,Seq.=xxxxx +{PG,LDKC:CU:LDEV}=[{1-1-(1),0x00:0x00:0x01},{1-1-(1),0x00:0x00:0x02}],Num. of LDEVs=2 [Install] Install function Volume to Space Volume to Space operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 164.
Page 197: 23 Logical Device (Ldev) Function
23 Logical Device (LDEV) Function Volume-Blockade Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Blockade,,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05, 0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A], [LDEV] Logical Device function Volume-Blockade Volume-Blockade operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 165.
Page 198: Volume-Format(H) Operation
Logical Device function Volume-Format Volume-Format operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 166. Table 166 Volume-Format Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number, and LDEV number...
Page 199: Volume-Format(Q) Operation
Detailed information displays for this operation, as shown in Table 167. Table 167 Volume-Format(H) Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number, and LDEV number Num. of LDEVs The number of LDEVs being set NOTE: The status does not change immediately after you execute an LDEV operation command. As a result, errors may occur after you execute the command.
Page 200: Volume-Restore(N) Operation
Volume-Restore(N) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Restore(N),,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05, 0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A],Num.of LDEVs=XXX [LDEV] Logical Device function Volume-Restore(N) Volume Restore (N) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 169.
Page 201: 24 Lun Manager (Lunm) Function
24 LUN Manager (LUNM) Function Add Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Add Host Group,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,HostGrpName}=[{XX,0xXXX,XXXXXXXXXXXXXXXX},{XX,0xXXX, XXXXXXXXXXXXXXXX}], Num.of Host Groups=2 [LUNM] LUN Manager function Add Host Group Add Host Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 202: Add World Wide Name (Wwn) Operation
Add LU Path Add Logical Unit operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 171. Table 171 Add LU Path Item Description Port...
Page 203: Change Host Group Operation
Item Description HostGrpID The host group number where the host is registered. Indicates WWN of the host bus adapter for the host registered in the host group. WWN is a 16-digit number in the hexadecimal format. Nickname The nickname of the host bus adapter for the host registered in the host group. Num.
Page 204: Delete Disk Controller (Dkc) World Wide Name (Wwn) Operation
LUN Manager function Change WWN Change World Wide Name operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 174. Table 174 Change WWN Operation Item Description Port...
Page 205: Delete Host Group Operation
Detailed information displays for this operation, as shown in Table 175. Table 175 Delete DKC WWN Operation Item Description Port The port name where the host of WWN deleted from WWN list was connected. Indicates WWN deleted from WWN list. WWN is a 16-digit number in the hexadecimal Delete WWN format.
Page 206: Delete World Wide Name (Wwn) Operation
Delete LU Path Delete Logical Unit Path operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 177. Table 177 Delete LU Path Operation Item Description Port...
Page 207: Set Channel Speed Operation
Item Description Indicates WWN of the host deleted from the host group. Num. of WWNs The number of hosts (WWN) deleted from the host group. Set Channel Speed Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Channel Speed,,Normal end,,,Seq.=xxxxx +{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,10}],Num. of Ports=4 [LUNM] LUN Manager function Set Channel Speed Set Channel Speed operation Normal end...
Page 208: Set Command Device Security (Commanddev Sec) Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 180. Table 180 Set CommandDev Operation Item Description The LDKC, CU, and LDEV numbers of the logical volume where the command device LDKC:CU:LDEV setting is changed Indicates whether the command device setting is enabled or disabled...
Page 209: Set Fibre-Channel Security Protocol (Fcsp) Host Operation
Set Fibre-Channel Security Protocol (FCSP) Host Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set FCSP Host,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,Kind,UserName,Change UserName}= [{1E,0x01,Add,1111111111111111,-}, {3E,0x01,Change,2222222222222222,3333333333333333},{5E,0x01,Delete, 4444444444444444,-}], Num. of Info=3 [LUNM] LUN Manager function Set FCSP Host Set FCSP Host operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 210: Set Fibre-Channel Security Protocol (Fcsp) Port Switch Operation
Set FCSP Port Information operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 183. Table 183 Set FCSP Port Info Operation Item Description Port...
Page 211: Set Fibre-Channel Security Protocol (Fcsp) Target Operation
Detailed information displays for this operation, as shown in Table 184. Table 184 Set FCSP Port Switch Operation Item Description Port The name of the port where authentication parameter has been set. The setting status whether to execute authentication by port. Switch Disable: Do not authenticate, Enable: Authenticate DH Group...
Page 212: Set Fibre Address Operation
Item Description DH Group Not used. (fixed to 0) UserName The user name of the host group. Num. of Grps The number of host groups where authentication parameter has been set. Set Fibre Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,,,Seq.=xxxxx +{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2 [LUNM] LUN Manager function...
Page 213 Value Add. Value Add. Value Add. Value Add. E0 (5) AB (37) 6B (69) 33 (101) DC (6) AA (38) 6A (70) 32 (102) DA (7) A9 (39) 69 (71) 31 (103) D9 (8) A7 (40) 67 (72) 2E (104) D6 (9) A6 (41) 66 (73)
Page 214: Set Fibre Topology Operation
Value Add. Value Add. Value Add. Value Add. B3 (31) 73 (63) 3C (95) Addresses outside parentheses = arbitrated-loop physical address (AL-PA). Addresses in parentheses = loop IDs. Set Fibre Topology Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Set Fibre Topology,,Normal end,,,Seq.=xxxxx +{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P}, {XX,Disable,P-to-P}], Num. of Ports=4 [LUNM] LUN Manager function Set Fibre Topology...
Page 215: Set Security Switch Operation
Set Host Mode operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 189. Table 189 Set Host Mode Operation Item Description Port The name of the port where the host group is created.
Page 216: Set Speed Mode Operation
[LUNM] LUN Manager function Set Security Switch Set Security Switch operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 191. Table 191 Set Security Switch Operation Item Description...
Page 217: Set Uuid Operation
Detailed information displays for this operation, as shown in Table 192. Table 192 Set Speed Mode Operation Item Description Channel Adapter The Channel Adapter (CHA) name (name of channel adapter). (CHA) Port Block The port block. For an 8-port channel adapter, port block A and B are output. The mode set to the port.
Page 218 LUN Manager (LUNM) Function...
Page 219: 25 Lun Expansion (Luse) Function
25 LUN Expansion (LUSE) Function Make LUSE Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUSE],Make LUSE,,Normal end,,,Seq.=xxxxx +{LUSE(LDKC:CU:LDEV)}=[{0x00:0x00:0x00,0x00:0x00:0x01,0x00:0x00:0x02, 0x00:0x00:0x03}, {0x00:0x01:0x00,0x00:0x01:0x01,0x00:0x01:0x02,0x00:0x01:0x03}], Num. of LUSEs=2 [LUSE] Logical Unit Number Expansion function Make LUSE Logical Unit Number Expansion operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 220: Release Luse Operation
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 195. Table 195 Release LUSE Operation Item Description LUSE(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the top LDEV Num.
Page 221: 26 Maintenance Function
26 Maintenance Function Blockade Operation Example 1 (blocking a Cluster) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Blockade,,Normal end,,,Seq.=xxxxx +Location=Cluster-1 Example 2 (blocking a PCB) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Blockade,,Normal end,,,Seq.=xxxxx +PCB=[CHA-1P],Num. of PCBs=1+ PDEV=HDD00-01 Example 3 (blocking an LDEV) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Blockade,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) +PG=[V1-1],Num.
Page 222: Correction Copy Operation
Item Description Num. of PCBs The number PCB to be blocked. PDEV The mounting location of the PDEV (physical device) to be blocked. The parity group number. Num. of PGs The number of parity groups. LDEV The LDEV number. Num. of LDEVs The number of LDEVs.
Page 223: Format Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 198. Table 198 Drive Interrupt Operation Item Description PDEV The mounting location of the PDEV (physical device). Format Operation The logged information indicates that the Format operation was only requested, but not finished.
Page 224: Format Stop Operation
Item Description Num. of LDEVs The number of LDEVs. NOTE: The status does not change immediately after you execute an LDEV operation command. As a result, errors may occur after you execute the command. Format Stop Operation This log information is output when the format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format Stop,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num.
Page 225: Pre Quick Format Stop Operation
Pre Quick Format Stop Operation NOTE: This log information is output when the Quick Format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Pre QuickFormat Stop,, Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Maintenance] Maintenance function Pre Quick Format Stop Pre Quick Format Stop operation Normal end The operation has ended normally.
Page 226: Recover Operation
Pre Quick Format Stop operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 202. Table 202 Quick Format Operation Item Description The parity group number.
Page 227: Replace Operation
Replace Operation Example 1 (replacing parts) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Replace,,Normal end,,,Seq.=xxxxx +Part name=SSVP Example 2 (replacing an SFP) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Replace,,Normal end,,,Seq.=xxxxx +SFP =[1A,3A,5A,7A],Num.of SFPs=4 Example 3 (replacing a Channel Adapter (CHA), a Disk Adapter (DKA), cache memory, shared memory and a cache switch) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Replace,,Normal end,,,Seq.=xxxxx +PCB=[CHA-1F],Num.
Page 228: Restore Operation
Detailed Information Detailed information displays for this operation, as shown in Table 204. Table 204 Replace Operation Item Description The name of the parts (EPOSW, PCICON, PCIADP, DKCPANEL, PSxx, PS-xx, BATTERY-xx, ACBOX-x, FAN-xx, TH-xx, SSVP/MN, SVP, HDDFANxx-x, BATTERY-Uxxx, BATREG-x, Parts name FUSE-xxx, ACBOX-Uxxx, DKUPS-xxx, SVRxxx-x, SVRxxx-Ex, EXTADP, BATTERY-SBx, SBADP, or LEDPNLxx-x) specified to be replaced.
Page 229: Restore Data Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Restore,,Normal end,,,Seq.=xxxxx +PCB=[CHA-1P],Num. of PCBs=1 +PDEV=HDD00-01 Example 2 (restoring an LDEV) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Restore,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) +PG=[V1-1],Num. of PGs=1 (for a virtual volume) +PG=[X1-1],Num. of PGs=1 (for a Dynamic Provisioning volume) +LDEV=[0x00:0x03:0x2f],Num.
Page 230: Size Change Operation
Restore Data operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 206. Table 206 Restore Data Operation Item Description PDEV The mounting location of the PDEV.
Page 231: Spare Disk Operation
Item Description Indicates the installation or uninstallation of a battery. Not output when no batteries are installed or uninstalled. Define Install: Installation of a battery, Uninstall: Uninstallation of a battery Num. of Battery The number of batteries to be installed or uninstalled. Pairs Spare Disk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Spare Disk,,Normal end,,,Seq.=xxxxx...
Page 232: Transfer Config Operation
Sequence number of log information (0000000000 to 4294967295) Transfer Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Transfer Config,,Normal end,Seq.=xxxxx [Maintenance] Maintenance function Transfer Config Transfer Config operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Type Change Operation Example 1 (changing the type of a Small Form-Factor Pluggable (SFP)) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Type Change,,Normal end,Seq.=xxxxx +{SFP,Type}=[{1A,Short Wave},{3A,Short Wave},{5A,Short Wave},{7A,Long Wave}],...
Page 233: Verify Operation
Item Description The type of the Small Form-Factor Pluggable (SFP) or the PCB. Type Short Wave: Short wave, Long Wave: Long wave DKF 4MP: DKA, EDKF 4MP: encryption-compliant DKA Num of SFPs The number of inserted Small Form-Factor Pluggables (SFPs). The mounting location of the PCB to be replaced.
Page 234: Verify Stop Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Verify Stop,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Maintenance] Maintenance function Verify Stop Verify Stop operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 211.
Page 235: 27 On-Demand (Ond) Function
27 On-Demand (OND) Function Release Cache/CLPR Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[OND],Release Cache/CLPR,,Normal end,,,Seq.=xxxxx +Cache(MB)=258048 ++{CLPR,Cache(MB)}=[{01,4096},{02,4096},{03,4096},{04,4096},{05,4096},{06,4096},{07,4096}, {08,4096},{09,4096},{10,4096},{11,4096},{12,4096},{13,4096},{14,4096}, -{15,4096},{16,4096},{17,4096},{18,4096},{19,4096},{20,4096},{21,4096},{22,4096},{23,4096}, {24,4096},{25,4096},{26,4096},{27,4096},{28,4096},{29,4096},{30,4096}, -{31,4096}],Num. of CLPRs=xx [OND] On-Demand (OND) function Release Cache/CLPR Release Cache/Cache Logical Partition (CLPR) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 236 On-Demand (OND) Function...
Page 237: Xp Performance Control (Perf Ctrl) Function
28 XP Performance Control (Perf Ctrl) Function Change XP Performance Control Group (PerfCtrlGrp) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PerfCtrl],Change PerfCtrlGrp,,Normal end,,,Seq.=xxxxx +{PPC Group, Priority,UpperLimit,Mode}=[{XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}], Num. of PPC Groups=1 [Perf Ctrl] XP Performance Control (Perf Ctrl) function Change PerfCtrlGrp Change XP Performance Control Group (PerfCtrlGrp) operation Normal end The operation has ended normally.
Page 238: Clear Ppc Info Operation
Clear PPC Info Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Clear PPC Info,,Normal end,,,Seq.=xxxxx [Perf Ctrl] XP Performance Control (Perf Ctrl) function Clear PPC Info Clear PPC Info operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Default Set Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Default Set,Kind=WWN,Normal end,,, Seq.=xxxxx...
Page 239: Xp Performance Control Group (Perfctrlgrp) Delete/Change (Del/Chg) Operation
XP Performance Control Group (PerfCtrlGrp) Delete/Change (Del/Chg) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],PerfCtrlGrp Del/Chg,,Normal end,,,Seq.=xxxxx +{Mode,PPC Group,Change Name}=[{Update,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}], Num. of PPC Groups=1 [Perf Ctrl] XP Performance Control (Perf Ctrl) function PerfCtrlGrp Del/Chg XP Performance Control Group (PerfCtrlGrp) Delete/Change (Del/Chg) operation Normal end The operation has ended normally.
Page 240: Set All Priority (Prio) Wwn Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295). Detailed Information Detailed information displays for this operation, as shown in Table 216. Table 216 Set All Prio Port Operation Item Description The setting status of the All Thresholds value in the port tab. AllPriority Enable: All Thresholds value is set.
Page 241: Set Ctrl Kind Operation
Item Description The rate type of the All Thresholds value. Mode IOPS: I/O rate, KB/s: Transfer rate This value is output only when the All Thresholds value is set. Set Ctrl Kind Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Ctrl Kind,Kind=WWN,Normal end,,, Seq.=xxxxx [Perf Ctrl] XP Performance Control (Perf Ctrl) function Set Ctrl Kind...
Page 242: Set Priority (Prio) Wwn Operation
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 219. Table 219 Set Prio Port Operation Item Description Port The port name. The attribute set to the port. Priority Prio: Prioritized port, Non-Prio: Non-prioritized port The channel type of path interface.
Page 243: Update Port Wwn Operation
Detailed information displays for this operation, as shown in Table 220. Table 220 Set Prio WWN Operation Item Description Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal format. The attribute set to the host bus adapter. Priority Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN.
Page 244: Update Xp Performance Control Group (Perfctrlgrp) Operation
Item Description Indicates WWN of the host bus adapter registered or deleted. WWN is a 16-digit number in the hexadecimal format. PPC Name The Perf Ctrl name of the host bus adapter registered or deleted. The attribute of the registered host bus adapter. Priority Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN This value is output only when the host bus adapter (WWN) is registered.
Page 245: Update World Wide Name (Wwn) Operation
Item Description The attribute of the Perf Ctrl group. Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN. Priority This attribute is applied to all host bus adapters that belong to this Perf Ctrl group. This value is output only when the Perf Ctrl group is created. The upper limit value applied to the host bus adapters belonging to this Perf Ctrl group when the attribute of the Perf Ctrl group is Non-Prio.
Page 246 Item Description Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal format. When the host bus adapter is changed, the WWN of the host bus adapter before change is output. The Perf Ctrl name of the host bus adapter. Change PPC Name When the Perf Ctrl name of the host bus adapter is changed, the Perf Ctrl name after change is output.
Page 247: 29 Performance Monitor Function
29 Performance Monitor Function Monitoring Switch (S/W) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Perf Mon],Monitoring S/W,Enable 60sec,,Normal end,,,Seq.=xxxxx [Perf Mon] Performance Monitor function Monitoring S/W Monitoring Options operation Enable 60sec Enable 60sec is the selected parameter. The operation uses the following parameters, as shown in Table 224.
Page 248: Parameters For S/W & Cu Operation
Enable 60sec is selected as the parameter. The operation uses the following parameters, as shown Table 225. Table 225 Parameters for S/W & CU Operation Parameter Description Enable XX sec Monitoring is enabled and the gathering interval is set as XX sec. Disable Monitoring is disabled.
Page 249: 30 Port Function
30 PORT Function Change Port Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PORT],Change Port,,Normal end,,,Seq.=xxxxx +Attribute=RCU Target ++Port=[1E,3E,5E,7E], Num.of Ports=4 [PORT] PORT function Change Port Change Port operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 226.
Page 250 PORT Function...
Page 251: 31 Optional Product (Pp) Key Function
31 Optional Product (PP) KEY Function PP Apply Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PP KEY],PP Apply,,Normal end,,,Seq.=xxxxx [PP KEY] Optional Product License Key function PP Apply PP Apply operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) PP Available Install Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PP KEY],PP Available Install,,Normal end,,, Seq.=xxxxx...
Page 252: Pp Disable Chk Operation
Item Description Result The result of installation in Available mode. Num. of PPs The number of options installed in Available mode. PP Disable chk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PP KEY],PP Disable chk,,Normal end,,,Seq.=xxxxx +{P.P.Name,Result}=[{JAVA API,Normal end}],Num. of PPs=1 [PP KEY] Optional Product License Key function PP Disable chk PP Disable File check operation Normal end...
Page 253: Pp Install Chk Operation
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 229. Table 229 PP Enable chk Operation Item Description P.P.Name The name of the enabled option. Result The result of checking the enabled option. Num.
Page 254: Pp Uninstall Chk Operation
++{P.P.Name,Result}=[{JAVA API,Normal end}, -{LUN Manager,Normal end}],Num. of PPs=2 [PP KEY] Optional Product License Key function File Install chk File Install check operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 231.
Page 255: Slpr Pp Change Operation
Detailed information displays for this operation, as shown in Table 232. Table 232 PP Uninstall chk Operation Item Description P.P.Name The name of the uninstalled option. Result The result of file check in the uninstallation. Num. of PPs The number of the uninstalled options. SLPR PP Change Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PP KEY],SLPR PP Change,,Normal end,,,Seq.=xxxxx +{P.P.Name,SLPR#,License Capa(GB)}=[{JAVA API,XX,ZZZZZ00},{LUN Manager,XX,ZZZZZ00}],...
Page 256 Optional Product (PP) KEY Function...
Page 257: 32 Remote Control Unit (Rcu) Function
32 Remote Control Unit (RCU) Function Add Path Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add Path,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,4} ++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}], Num of Port Pairs=8 Example 2 (CU Free is not used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add Path,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}={99999,0x00,0x3F,0x00,0x7F,0x0004,4} ++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}], Num of Port Pairs=8...
Page 258: Add Rcu Operation
Item Description The CU number of the paired CU. SSID The SSID. MCU Port The port number of MCU. RCU Port The port number of RCU. Num of Port Pairs The number of port pairs set. Add RCU Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,MIH Time(s), Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,Default,4,08,015,001,...
Page 259: Change Rcu Option Operation
Item Description RCU LDKC The LDKC number of the paired LDKC. The path group ID of the registered RCU. When the path group ID is default setting, Path Gr.ID Default is output. Controller ID The controller ID of the registered RCU device. The CU number of the connected CU.
Page 260: Delete Path Operation
Remote Control Unit function Change RCU Option Change Remote Control Unit Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 236.
Page 261: Delete Path Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,4} ++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}], Num of Port Pairs=8 Example 2 (CU Free is not used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}={99999,0x00,0x3F,0x00,0x7F,0x0004,5} ++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}], Num of Port Pairs=8 [RCU] Remote Control Unit function Delete Path Delete Path operation Normal end...
Page 262: Delete Rcu Operation
Delete RCU Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,5} Example 2 (CU Free is not used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,MCU,RCU LDKC,SSID}={99999,0x00,0x3F,0x00,0x0004} [RCU] Remote Control Unit function Delete RCU Delete Remote Control Unit operation Normal end The operation has ended normally.
Page 263: 33 Volume Shredder Function
33 Volume Shredder Function End Shredding Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Shredder],End Shredding,,Normal end,,, Seq.=xxxxx +{Times,Result}=[{1,Nomal},{2,Nomal},{3,Error}],Num. of Data=3 [Shredder] Volume Shredder function End Shredding End Shredding operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 264: Suspend Shredding Operation
0x01:0x01, 0x00:0x01:0x02,0x00:0x03:0x00,0X00:0x03:0x01,0x00:0x03:0x02,0x00:0x0a:0xa0, -0x00:0x0a:0xa1,0x00:0x0a:0xa2,0x00:0x0a:0xa3,0x00:0x1f:0xf8,0x00:0x1f:0xf9, 0x00:0x1f:0xfa, 0x00:0x1f:0xfb,0x00:0x1f:0xfc,0x00:0x1f:0xfd,0x00:0x1f:0xfe, -0x00:0x1f:0xff],Num. of LDEVs=21 [Shredder] Volume Shredder function Set Shredding Set Shredding operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 240.
Page 265: Suspend Shredding Operation
Suspend Shredding Suspend Shredding operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 241. Table 241 Suspend Shredding Operation Item Description The owner ID.
Page 266 Volume Shredder Function...
Page 267: Shadowimage (Si) For Mainframe Function
34 ShadowImage (SI) for Mainframe Function Add Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],Add Pair,,Normal end,,,Seq.=xxxxx +Copy Pace=Faster ++{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,0,Normal end}, {0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,1,Error(xxxx-yyyy)}],Num. of Pairs=2 [SI] ShadowImage for Mainframe function (for the IBM z/OS) Add Pair Add Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 268: Change Reserve Operation
Change Reserve Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[SI],Change Reserve,,Normal end,Seq.=xxxxx +Attribute=Set ++{VOL(LDKC:CU:LDEV),Result}=[{0xZZ:0xXX:0xYY,Normal end},{0xZZ:0xXX:0xYY, Error(xxxx-yyyy)}],Num.of Vols=2 [SI] ShadowImage for Mainframe function (for the IBM z/OS) Change Reserve Change Reserve operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 269: Delete Pair Operation
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 244. Table 244 CTG Operation Item Description The consistency group number. Indicates whether the CT group (consistency group) is newly registered or the existing CT group is deleted.
Page 270: Initialize Operation
Item Description The result of operation Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of deleted pairs Initialize Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],Initialize,,Normal end,,,Seq.=xxxxx [SI] ShadowImage for Mainframe function (for the IBM z/OS) Initialize Initialize operation Normal end...
Page 271: Resync Pair Operation
Detailed information displays for this operation, as shown in Table 246. Table 246 Option Operation Item Description Indicates whether the Swap & Freeze option is enabled or disabled. Swap & Freeze Enable: Option is enabled, Disable: Option is disabled. Indicates whether the host I/O option is enabled or disabled. HOST I/O Performance Enable: Option is enabled, Disable: Option is disabled.
Page 272: Split Pair Operation
Item Description The type of resynchronization Normal Copy: Normal resynchronization Resync Type Quick Resync: High speed resynchronization Reserve Copy: Reverse resynchronization Quick Restore: High speed restore S-VOL The LDKC, CU, and LDEV numbers of the source volume in the resynchronized pair (LDKC:CU:LDEV) T-VOL The LDKC, CU, and LDEV numbers of the target volume in the resynchronized pair...
Page 273: Suspend Pair Operation
Item Description The split type Quick Split: Pair split by background copy, Split Type Steady Split: Pair split by update copy, Migration: Data migration S-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the source volume in the split pair T-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the target volume in the split pair The result of operation Result...
Page 274 ShadowImage (SI) for Mainframe Function...
Page 275: 35 Xp Snapshot Function
35 XP Snapshot Function Pairsplit-S Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Snapshot],Pairsplit-S,,Normal end,,,Seq.=xxxxx +{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MU,Result}=[{0xAA:0xBB:0xCC,0xDD:0xEE:0xFF,00, Normal end},{0xAA:0xBB:0xCC,0xDD:0xEE:0xFF,01,Error(xxxx-yyyy)}],Num. of Pairs=2 [Snapshot] HP XP Snapshot function Pairsplit-S Pairsplit-S operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 250.
Page 276 XP Snapshot Function...
Page 277: 36 Snmp Function
36 SNMP Function Set SNMP Agent Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SNMP],Set SNMP Agent,,Normal end,,,Seq.=xxxxx +Install=Disable +Manager=[(158.214.133.1),(158.214.133.2),(158.214.133.3),(1:0:0:0:0:0:0:1), (snip) -(158.214.133.31),(158.214.133.32),(AAAA:0:0:0:0:0:0:FFFF)],Num. of Managers=xx +Community=1234567891123456789212345678931234567894123456789512345678961234567897123 45678981234567899123456789012345678911234567892123456789312345678941234567895 ++Trap=[(158.214.133.1),(158.214.133.2),(158.214.133.3),(1:0:0:0:0:0:0:1), (snip), -(158.214.133.31),(158.214.133.32),(AAAA:0:0:0:0:0:0:FFFF)],Num of Traps=xx, (snip) -Num. of Communities=xx +System Group(Name,Contact,Location)= {12345678911234567892123456789312345678941234567895123456789612345678971234567898123 456789912345678901234567891123456789212345678, -12345678911234567892123456789312345678941234567895123456789612345678971234567898123 456789 9123456789012345678911234567892123456789312345678941234567895123456789612345, -12345678911234567892123456789312345678941234567895123456789612345678971234567898123 456789 9123456789012345678911234567892123456789312345678941234567895123456789612345} [SNMP] Simple Network Management Protocol function Set SNMP Agent Set SNMP Agent operation...
Page 278 Item Description Community The registered community name. The IP address where the trap of community is reported. The IP address divided by a Trap period (.) is an IPv4 address, and the IP address divided by a colon (:) is an IPv6 address. Num.
Page 279: 37 Truecopy (Tc) For Mainframe Function
37 TrueCopy (TC) for Mainframe Function Add Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Add CTG,,Normal end,,,Seq.=xxxxxx +{LDKC,CTG,Path,Offloading(min.),Inflow Control,Copy Pending(min.),RCU Ready(min.), Timer Type}= {0x00,0x00,Fibre,005,Enable,05,05,System} [TC] TrueCopy for Mainframe function (for IBM z/OS) Add CTG Add Consistency Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 280: Add Pair Operation
Item Description The timer type set. Timer Type System: System timer, Local: Local timer, None: No timer (system timer) Add Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [TC],Add Pair,,Normal end,,,Seq.=xxxxxx +{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),S/N,LDKC,SSID,ControllerID,Type, Initial Copy, Fence Level,Copy Pace, Priority,Diff,CFW,DFW,TS, CTG, Error Level,Result}= -{0x00:0x00:0x00,0xFF,99999,0x00,0x0004,4,Async,Entire,Never,15,032,Auto, Only M-VOL,-,-,0x00,Group,Normal End}, (snip) -(snip), Num.of Pairs=xx [TC]...
Page 281: Change Async Option Operation
Item Description Copy Pace The initial copy speed set (the number of tracks you can copy at a time) Priority The priority of the initial copy operation set (scheduling order) Diff The unit of the differential management set: Auto, Cylinder, Track Indicates whether the setting to copy the CFW data to the remote volume is enabled or not.
Page 282: Change Consistency Group (Ctg) Option Operation
Detailed Information Detailed information displays for this operation, as shown in Table 254. Table 254 Change Async Option Item Description CLPR The CLPR number. Rate (%) The specified pending update data rate. Change Consistency Group (CTG) Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC], Change CTG Option,,Normal end,,,Seq.=xxxxx +{LDKC,CTG, Offloading(min.),Inflow Control,Copy Pending(min.),RCU Ready(min.), Timer Type}= {0x00,0x00,090,Enable,05,05,System}...
Page 283: Change Option Operation
Item Description The timer type set. Timer Type System: System timer, Local: Local timer, None: No timer (system timer) Change Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Change Option,,Normal end,,,Seq.=xxxxxx +{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s), Service SIM, Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable} +{LDKC,CU,Service SIM,PPRC Support,SCP Time(s), Parallel Initial Copy(CU)}= -{0x00,0x00,Not Report,Yes,600,4},{0x00,0x01,Not Report,Yes,600,4},{0x00,0x02, Not Report,...
Page 284: Change Pair Option Operation
Item Description Indicates whether the remote copy related SIM is reported or not. Service SIM Report, Not Report Indicates whether the host supports PPRC or not. PPRC Support Yes: Support, No: Not support SCP Time(s) The SCP delay time when the pair is suspended. The unit is second. Parallel Initial Copy The number of parallel operation of initial copy by CU.
Page 285: Clear Sim Operation
Item Description Indicates whether the setting to copy the CFW data to the remote volume is enabled or not Only M-VOL: Copy to main volume only is enabled Copy To R-VOL: Copy to main and remote volume is enabled The error level changed (handling if trouble occurs) This value is output when the pair option of the asynchronous pair is changed only Error Level Volume: Volume (appropriate volume only is suspended)
Page 286: Delete Consistency Group (Ctg) Operation
Serial number of log information (0000000000 to 4294967295) Delete Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Delete CTG,0x00:0x00,,Normal end, Seq.=xxxxxx [TC] TrueCopy for Mainframe function (for IBM z/OS) Delete CTG Delete Consistency Group operation 0x00 The operation uses the following parameters, as shown in Table 258.
Page 287: Function Switch Operation
Detailed information displays for this operation, as shown in Table 259. Table 259 Delete Pair Operation Item Description The LDKC, CU, and LDEV numbers of the volume on the primary site in the deleted pair (LDKC:CU:LDEV) PairVOL (LDEV) The LDEV number of the paired volume in the deleted pair The volume type of the connected volume Type M-VOL: Main volume, R-VOL: Remote volume...
Page 288: Resume Pair Operation
Detailed information displays for this operation, as shown in Table 260. Table 260 Function Switch Operation Item Description Each bit position (on/off) of the function switch information assigned by 64 bits. The beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off, Switch and "1"...
Page 289: Script Operation
Item Description Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair is restored. This value is output only when the synchronous pair is restored. When the asynchronous pair is restored, a hyphen (-) is output. Enable: transferred, Disable: not transferred The resume range set (the range to restore the asynchronous pair).
Page 290: Suspend Pair Operation
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 263. Table 263 Script Operation Item Description FileName The file name of the executed script. Suspend Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Suspend Pair,,Normal end,Seq.=xxxxxx +{VOL(LDKC:CU:LDEV),PairVOL(LDEV),Type,SSB,Kind,Range,Mode,Result}=...
Page 291 Item Description The suspend range set. This value is output when the asynchronous pair is split only. Volume: Volume (specified TrueCopy for Mainframe Asynchronous pairs only are Range suspended) Group: Group (all other TrueCopy for Mainframe Asynchronous pairs in the same consistency group as the specified pairs are suspended) The setting of unreflected data handling.
Page 292 TrueCopy (TC) for Mainframe Function...
Page 293: Universal Replicator (Ur) For Mainframe Function
38 Universal Replicator (UR) for Mainframe Function Add-Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],Add-Pair,,Normal end,,,Seq.=xxxxxx +{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Priority, Initial Copy, M-JNLG,R-JNLG,Path Gr.ID,Error Level,CFW,Result}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00, 65432,5,32,Entire,0x02,0x00,Default,Group,Copy to S-VOL,Normal end}, -{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,32,Entire,0x02,0x00,Default,Group, Copy to S-VOL, Normal end}],Num. of Pairs=2 [UR] Universal Replicator for Mainframe function (for IBM z/OS) Add-Pair Add-Pair operation Normal end The operation has ended normally.
Page 294: Clear-Sim Operation
Item Description Indicates whether initial copy or paircreate operation for Delta resync is executed or Initial Copy Entire: execute initial copy, None: do not execute initial copy, Delta: execute paircreate operation for Delta resync M-JNLG The master journal group number R-JNLG The restore journal group number Path Gr.ID...
Page 295: Edit-Exctg (Extended Consistency Group) Operation
Universal Replicator for Mainframe function (for IBM z/OS) Delete-Pair Delete-Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed information Detailed information displays for this operation, as shown in Table 266. Table 266 Delete-Pair Operation Item Description...
Page 296: Parameters For Edit-Exctg Operation
++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x00,0x00,0x01, 65432,5,0x00: 0x20:0x00,Normal end},{0x00,0x01,0x01,65432,5,0x00:0x20:0x00,Normal end}] +{LDKC,EXCTG}={0x00,0x01} ++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x01,0x00,0x01, 65433,5,0x00: 0x20:0x00,Normal end}] +Num. of EXCTGs=2 [UR] Universal Replicator for Mainframe function (for IBM z/OS) Edit-EXCTG Extended consistency group operation Add is selected as the parameter. This operation uses the following parameters: Table 267 Parameters for Edit-EXCTG Operation Parameter Description Add journal groups to the extended consistency group.
Page 297: Journal-Option Operation
Item Description The result of the operation Result Normal end: normal end, Error(xxxx-yyyyy): abnormal end xxxx: part code, yyyyy: error code The number of extended consistency groups for which the configuration has been Num. of EXCTGs changed Journal-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],Journal-Option,,Normal end,Seq.=xxxxx +{LDKC,JNLG,MetaData Ratio,Extent,Data Overflow Watch(s),Inflow Control,Copy Pace, Timer Type, Path Watch Time,Forward Path Watch Time,Use of Cache,Speed of Line(Mbps),Delta...
Page 298: Journal-Vol Operation (With Add Parameter)
Item Description Copy Pace The speed of initial copy. 150: Low speed, 500: Medium speed, 1500: High speed Timer Type The timer type. System: System timer, Local: Local timer, None: No timer The path blockade watch period set. Path Watch Time The unit is minutes, hours or days.
Page 299: Journal-Vol Operation (With Group-Delete Parameter)
Universal Replicator for Mainframe function (for IBM z/OS) Journal-Vol Journal-Vol operation Add is selected as the parameter. The operation uses the following parameters, as shown in Table 270. Table 270 Parameters for Journal-Vol Operation Parameter Description The journal volume is deleted. Delete The journal volume is deleted.
Page 300: Pair-Option Operation
Journal-Vol Journal-Vol operation Group-Delete Group-Delete is selected as the parameter. The operation uses the following parameters, as shown Table 272. Table 272 Parameters for Journal-Vol Operation Parameter Description Group-Delete The journal group is deleted. Remove-JNLG The journal group is forcibly deleted from the extended consistency group. (Force) Normal end The operation has ended normally.
Page 301: R-Cmd.dev. Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 274. Table 274 Pair-Option Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the primary data volume S-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the secondary data volume MirrorID...
Page 302: Resume-Pair Operation
Assign is selected as the parameter. The operation uses the following parameters as shown in Table 275. Table 275 Parameters for R-Cmd.Dev. Operation Item Description Assign The remote command device is assigned. Release The remote command device is released. Normal end The operation has ended normally.
Page 303: Suspend-Pair Operation
Resume-Pair Resume-Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Table 277 Resume-Pair Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the primary data volume The LDKC, CU, and LDEV numbers of the secondary data volume S-VOL(LDKC:CU:LDEV) When it is set by using a spreadsheet, N/A is output for CU and LDEV numbers.
Page 304: Suspend-Pair Operation
Suspend Mode,Result}=}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,P-VOL,Disable, Volume, Flush, Normal end}, -{0x00:0x00:0x01,0x00:0x20:0x00,0x01,65432,5,P-VOL,Disable,Volume,Flush,Normal end}, Num. of Pairs=2 [UR] Universal Replicator for Mainframe function (for IBM z/OS) Suspend-Pair Suspend-Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 278.
Page 305: System-Option Operation
Item Description Num. of Pairs The number of pairs System-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR],System-Option,Normal end,,,Seq.=xxxxx +Max Initial Copy=64 +{LDKC:CU,Change SIM Report}=[{0x00:0x00,Report},{0x00:0x01,Not Report},{0x00:0x02, Not Report},(snip) - (snip), {0x01:0xFE,,Report}],Num of CUs=510 [UR] Universal Replicator for Mainframe function (for IBM z/OS) System-Option System-Option operation Normal end The operation has ended normally.
Page 306 Universal Replicator (UR) for Mainframe Function...
Page 307: 39 Virtual Lvi / Virtual Lun (Vll) Function
39 Virtual LVI / Virtual LUN (VLL) Function Install Customized Volume (CV) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Install CV,,Normal end,,,Seq.=xxxxxx +{PG,LDKC:CU:LDEV,Start LBA,Emulation,Size,Unit,System Disk }= [{XX-XX-(X),0xXX:0xXX:0xXX, XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}, {X-X-(X),0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}],Num. of LDEVs=2 [VLL] Virtual LVI / Virtual LUN function Install CV Install Customized Volume (CV) operation No parameter No parameter is selected in the above example.
Page 308: Make Volume Operation
Detailed information displays for this operation, as shown in Table 281. Table 281 Install CV Operation Item Description The parity group number The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV The LDKC, CU, and LDEV numbers The start LBA...
Page 309: Set Ssid Operation
Parameter Description Quick Formatted Make Volume. The logged information indicates that the formatting Quick Format was only requested, but not finished. NOTE: No parameters are selected for any case other than those described in this table. The logged information indicates that the formatting was only requested, but not finished. Normal end The operation has ended normally.
Page 310: System Disk Options Operation
Set SSID operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 284. Table 284 Set SSID Operation Item Description The SSID number SSID The SSID specified when Volume Initialize or Make Volume is executed is also output.
Page 311: Volume Initialize Operation
Volume Initialize Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VLL],Volume Initialize,,Normal end,,,Seq.=xxxxxx +{PG,LDKC:CU:LDEV}=[{XX-XX-(X),0xXX:0xXX:0xXX},{XX-XX-(X),0xXX:0xXX:0xXX}],Num. of PGs=2 [VLL] Virtual LVI / Virtual LUN function Volume Initialize Volume Initialize operation No parameter No parameter is selected in the above example. This operation uses the following parameters, as shown in Table 286.
Page 312: Volume To Space Operation
Volume to Space Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Volume to Space,,Normal end,,,Seq.=xxxxxx +{PG,LDKC:CU:LDEV}=[{XX-XX-(X),0xXX:0xXX:0xXX},{XX-XX-(X),0xXX:0xXX:0xXX}], Num. of LDEVs=2 [VLL] Virtual LVI / Virtual LUN function Volume to Space Volume to Space operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 313: Xp Auto Lun Software Function
40 XP Auto LUN Software Function Create Auto Plan Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VM], Create Auto Plan,,Normal end,,,Seq.=xxxxx [Auto LUN] HP XP Auto LUN Software function Create Auto Plan Log Create Auto Plan Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Del Auto Plan Log Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Del Auto Plan Log,,Normal end,,,Seq.=xxxxxx [Auto LUN]...
Page 314: Del Migration Log Operation
Delete Auto Plan operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 289. Table 289 Delete Auto Plan Operation Item Description The executed operation.
Page 315: Set Auto Plan Param Operation
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 290. Table 290 Set Auto Plan Param Operation Item Description The executed operation. Default: The default auto migration plan is applied (click the Default button, and then SetType click the Set button).
Page 316: Set Class Threshold Operation
Set Class Threshold Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Class Threshold,,Normal end,,, Seq.=xxxxx +{ClassName,AvailabilityMax(%)}=[{A,100},{B,100},{C,100},{D,100},{E,100},{F,100}] Num. of Classes = 6 [Auto LUN] HP XP Auto LUN Software function Set Class Threshold Set Class Threshold operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information...
Page 317: Set Migration Vol Operation
Detailed Information Detailed information displays for this operation, as shown in Table 292. Table 292 Set Fixed PG Operation Item Description The executed operation to the parity group. Type Set: Set to the fixed parity group, Release: Set to the normal parity group. ID of the parity group whose settings are changed.
Page 318: Set Plan Condition Operation
Item Description The logical volume ID of the migration target. The number on the left of the colon is an LDKC number, the number between the colons is a CU number and the number on the TargetLDEV right of the colon is an LDEV number. This value is output only when the manual migration plan is set.
Page 319: Set Reserved Vol Operation
Item Description The specified upper limit of the migration time. TimeRequiredMax(min) The upper limit of the migration time is displayed by the number from 10 to 120. The unit is minute. The specified upper limit of the disk usage rate. AvailabilityMax(%) The upper limit of the disk usage rate is displayed by the number from 10 to 100.
Page 320 Item Description The result of operation. Result Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed xxxx: Part code, yyyyy: Error code Num. of LDEVs The number of logical volumes which the setting is changed. XP Auto LUN Software Function...
Page 321: Volume Retention Manager (Vrm) Function
41 Volume Retention Manager (VRM) Function Attribute Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VRM],Attribute,,Normal end,,,Seq.=xxxxxx +{LDKC:CU:LDEV,Attribute,Result}=[{0x00:0x00:0x01,0x80,Normal end}, {0x00:0x00:0x02,0x82,Error(9205-8122),{0x00:0x00:0x03,0x81,Normal end}, {0x00:0x00:0x03,0x81,Normal end}],Num. of LDEVs=XXX [VRM] Volume Retention Manager function Attribute Attribute operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 322: Vtoc Operation
VTOC Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VRM],VTOC,,Normal end,,,Seq.=xxxxxx +{LDKC:CU:LDEV,VTOC(Trk),Result}=[{0x00:0x00:0x01,xxxxx,Normal end}, {0x00:0x00:0x02,xxxxx,Error(9205-8122)},{ 0x00:0x00:0x03,xxxxx,Normal end}, {0x00:0x00:0x03,xxxxx,Normal end}],Num. of LDEVs=XXX [VRM] Volume Retention Manager function VTOC Volume Table of Contents operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table...
Page 323: 42 Volume Security (Vsec) Function
42 Volume Security (VSEC) Function Set Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VSEC],Set Group,,Normal end,,,Seq.=xxxxxx +LDKC=0x00 +{Security Group,Host Group,LDEV Group,Security,Attr,RsvVol}=[{SecGrp01,HstGrp01, LdvGrp01, Enable,Access,Disable},{SecGrp02,HstGrp02,LdvGrp02,Enable,Access,Disable}, -{SecGrp03,HstGrp03,LdvGrp03,Enable,Access,Disable},{SecGrp04,HstGrp04,LdvGrp04, Disable, Pool,Enable},{SecGrp05,HstGrp05,LdvGrp05,Disable,Pool,Enable}, (snip) -{SecGrp09,HstGrp09,LdvGrp09,Disable,Pool,Enable},{SecGrp61,HstGrp61,LdvGrp61, Disable, Pool,Enable},{SecGrp62,HstGrp62,LdvGrp62,Disable,Pool,Enable}], Num. of Security Groups=xx +Host Group=HstGrp01 ++Host(Type,Model,SeqNo,LPAR,Attr)=[{000100,001,02000000000001,001,CNT(Ex)}, {000100,001,02000000000001,001,CNT(Ex)},{000100,001,02000000000001,001,CNT(Ex)}, -{000100,001,02000000000001,001,CNT(Ex)},{000100,001,02000000000001,001,CNT(Ex)}, {000100,001,02000000000001,001,CNT(Ex)},{000100,001,02000000000001,001,CNT(Ex)}, (snip) -{000100,001,02000000000001,001,CNT(Ex)},{000100,001,02000000000001,001,CNT(Ex)}, {000100,001,02000000000001,001,CNT(Ex)}],Num. of Hosts=xx ++Port=[1A,3A,5A,7A,1B,3B,5B,7B,1C,3C,5C,7C,1D,3D,5D,7D,1E,3E,5E,7E,1F,3F,5F,7F, 1G,3G, -5G,7G,1H,3H,5H,7H,1J,3J,5J,7J,1K,3K,5K,7K,1L,3L,5L,7L,1M,3M,5M,7M,1N,3N,5N,7N,1P,...
Page 324: Set Group Operation
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 298. Table 298 Set Group Operation Item Description LDKC The group's LDKC number. Security Group The security group name.
Page 325 Item Description The CU number registered in the LDEV group. LDEV The LDEV numbers registered in the LDEV group. Num. of LDEVs The number of LDEVs registered. Num. of LDEV The number of LDEV groups. Group XP24000/XP20000 Audit Log User and Reference Guide...
Page 326 Volume Security (VSEC) Function...
Page 327: 43 V Volume (Vvol) Function
43 V Volume (VVOL) Function Add V-Vol (Snapshot) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL],Add V-Vol (Snapshot),,Normal end,,,Seq.=xxxxx +{V-VolGroup,Capa(blocks),CLPR,Emulation,Result}={V1-1,1,4294967296,0,OPEN-V,Normal end} ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x00:0x00,96000},{0x00:0x00:0x01,96000}],Num. of LDEVs=2 +{V-VolGroup,Capa(blocks),CLPR,Emulation,Result}={V2-1,1,4294967296,0,OPEN-V,Normal end} ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x01:0x00,4294967296}],Num. of LDEVs=1 +Num. of Groups=2 [VVOL] V Volume function Add V-Vol (Snapshot) Add V-Vol (Snapshot) operation for XP Snapshot Normal end The operation has ended normally.
Page 328: Add V-Vol (Thp) Operation
Item Description SSID The SSID Num. of LDEVs The number of V-VOLs created Num. of Group The number of V-VOL groups created Add V-Vol (THP) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL],Add V-Vol (THP),,Normal end,,,Seq.=xxxxx +{V-VolGroup,Capa(blocks),CLPR,Emulation,Result}={X1-1,1,4294967296,0,OPEN-V,Normal end} ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x00:0x00,96000},{0x00:0x00:0x01,96000,0x00D8}], Num. of LDEVs=2 +{V-VolGroup,Capa(blocks),CLPR,Emulation,Result}={X2-1,1,4294967296,0,OPEN-V,Normal end} ++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x01:0x00,4294967296,0x00D8}],Num. of LDEVs=1 +Num.
Page 329: Asso V-Vol/Rel Pool Operation
Item Description LDEVCapa(blocks) The capacity of the created V-VOLs indicated by blocks SSID The SSID Num. of LDEVs The number of V-VOLs created Num. of Group The number of V-VOL groups created Asso V-VOL/Rel Pool Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL], Asso V-VOL/Rel Pool,,Normal end,Seq.=xxxxx +{Command,LDKC:CU:LDEV,Pool ID,Warn Threshold(%)}=[{Associate,0x00:0x00:0x00,0,80}, {Associate,0x00:0x00:0x01,0,80},{Associate,0x00:0x00:0x02,0,80}],Num.
Page 330: Delete V-Vol (Snapshot) Operation
Item Description The warn threshold for the THP volume. Warn Threshold (%) The unit is percent (%). This value is output only when a link is connected or the warn threshold is changed. Num. of VOLs The number of THP volumes that have been operated. Delete V-Vol (Snapshot) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL],Delete V-Vol (Snapshot),,Normal end,,,Seq.=xxxxx +{V-VolGroup,Result}=[{V1-1,Normal end},{V2-1,Normal end},{V3-1,Normal end}],...
Page 331: Emulation Operation
Delete V-Vol (THP) Delete V-Vol (THP) operation for HP XP Thin Provisioning Software Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 303.
Page 332: Pool Change/Delete Operation
Detailed information displays for this operation, as shown in Table 304. Table 304 Emulation Operation Item Description Indicates the change of emulation mode. 0: Changes the emulation mode of an LDEV that a path is not defined, from Open 0V to Open V.
Page 333: Pool Optimize Operation
Item Description The threshold of the usage rate of the pool. Threshold (%) The unit is percent (%). This index is output only when pool information is changed. The result of the operation. Result Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed xxxx: Part code, yyyy: Error code The number of the pool where the settings have been changed or the number of the pool Num.
Page 334: Pool Sim Comp Req Operation
Detailed information displays for this operation, as shown in Table 306. Table 306 Pool Restore Operation Item Description Pool ID The restored pool ID. The result of the operation: Result Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed xxxx: Part code, yyyy: Error code Num.
Page 335: Set Xrc Option Operation
[VVOL] V Volume function Set Pool Set Pool operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 308. Table 308 Set Pool Operation Item Description Pool ID...
Page 336: Set Xrc Option Operation
Set XRC Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 309. Table 309 Set XRC Option Operation Item Description CLPR The CLPR number (00 to 31).
Page 337: Audit Log Information For The Commands Sent From The Host
44 Audit Log Information for the Commands Sent from the Host This chapter provides audit log information about the commands sent from the host. The audit logs received when you operate the host are not the history of the operations. They are the history of the commands that the storage system received from the host.
Page 338: Open I/F Interface Name
The LPR number of the host that sent the command. When the commands are received from the storage system, 0x0000 is displayed. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information The commands and the parameters that the storage system received from the host are output. The meaning of the output information is not exhibited.
Page 339: Audit Log Information About The Key Used For The Encryption License Key
45 Audit Log Information about the Key Used for the Encryption License Key This chapter provides audit log information about the key used for data encryption. • Encryption (ENC) Function Create Enc. Key Operation, page 339 • Encryption (ENC) Function Enc.
Page 340: Encryption (Enc) Function Enc. Key Restore Operation
Encryption (ENC) Function Enc. Key Restore Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ENC],Enc. Key Restore,,Normal end,,,Seq.=xxxxx [ENC] ENC function Enc. Key Restore Encryption Key Restore operation Normal end The operation has ended normally. Seq.=xxxxxx Log information serial number (0000000000 to 4294967295) Encryption (ENC) Function PG Enc.
Page 341: Install Function Set Encryption Key Operation
Install Function Set Encryption Key Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Encryption Key,,Normal end,,, Seq.=xxxxx [Install] Install function Set Encryption Key Set Encryption Key operation Normal end The operation has ended normally. Seq.=xxxxxx Log information serial number (0000000000 to 4294967295) XP24000/XP20000 Audit Log User and Reference Guide...
Page 342 Audit Log Information about the Key Used for the Encryption License Key...
Page 343: 46 Support And Other Resources
46 Support and Other Resources Related Documentation • HP StorageWorks XP24000/XP20000 Disk Array Owner's Guide • HP StorageWorks XP24000/XP20000 LUN Manager User's Guide • HP StorageWorks XP24000/XP20000 Remote Web Console User's Guide You can find these documents on the HP Manuals website: http://www.hp.com/support/manuals In the Storage section, click Storage Software and then select a product.
Page 344: Subscription Service
• Product serial numbers • Error messages • Operating system type and revision level • Detailed questions Subscription Service HP recommends that you register your product at the Subscriber’s Choice for Business website: http://www.hp.com/go/e-updates After registering, you will receive email notification of product enhancements, new driver versions, firmware updates, and other product resources.
Page 345: A Audit Log Information File Output By Function
A Audit Log Information File Output by Function This appendix includes more detailed information about the audit log information file. Table 311 lists audit log information file output for operations that are common to all Remote Web Console functions. Table 312 lists audit log information file output for each program option button on the Remote Web Console Main window.
Page 346: Output Of Audit Log Information File And Operations
Option Operation Audit Log Information File Output Note Function Operation Function Operation Name Name Storage Device Edit Table 312 Output of Audit Log Information File and Operations Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name System...
Page 347 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Set Host Mode Add WWN Add LU Path Erase WWN Delete DKC WWN “Drag & Drop” WWN node Add WWN Delete WWN Paste (LU Path) Add LU Path Set UUID Set UUID...
Page 348 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Change Authentication 2, 4 Set FCSP Host Information (Host) Delete Authentication 2, 4 Set FCSP Host Information (Host) Register Authentication 2, 4 Set FCSP Port Switch Information Authentication Mode: 2, 4...
Page 349 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Set Shredding/ End Shredding NOTE: Shredding Shredder Set Shredding is output when shredding started. End Shredding is output when shredding ended. Suspend Suspend Shredding Encryption settings for Parity PG Enc.
Page 350 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Set Cache Residency (Open Cache Cache 2, 4 Cache Set Open DCR Residency Residency Volume) Set Cache Residency (M/F 2, 4 Set M/F DCR Volume) Release Cache Residency (Open 2, 4 Delete Open DCR...
Page 351 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name 2, 4 Set All Prio Port Server Priority Port All Thresholds Perf Ctrl Manager Set Ctrl Kind 2, 4 Set Priority (Prio) Port (Attribute Set Prio Port / Threshold / Upper) Set All Prio Port 2, 4...
Page 352 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Initialize Default Set Delete ports if Channel Adapter Clear PPC Info (CHA) is removed HP XP Continuous Pair Operation Paircreate (CA) Paircreate Access Paircreate Paircreate (ESAM) ESAM Pairsplit-S (CA) Pairsplit-S...
Page 353 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Asynchronous Add Consistency Group Cnt Ac Add CTG Operation Consistency Group Option Change CTG Option Delete Consistency Group Delete CTG Async Option Change Async Option System Option Option Change Option...
Page 354 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Pair Operation Paircreate Cnt Ac-J Paircreate Pairsplit-r Pairsplit-r Pairresync Pairresync Pairsplit-S Pairsplit-S Change Pair Option Pair-Option Optional Change System Option System-Option Operation HP XP Business Pair Operation Paircreate Paircreate...
Page 355 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Change Pair Option Change Pair Option Delete Command Device Delete Cmd.Dev Add RCU Add RCU Operation Change RCU Option Change RCU Option Delete RCU Delete RCU 2, 4 Add Path Add Path...
Page 356 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Suspend Pair Suspend-Pair Resume Pair Resume-Pair Delete Pair Delete-Pair Remove JNLG from EXCTG Journal-Vol (Force) Assign Remote Command R-Cmd.Dev. Device Release Remote Command R-Cmd.Dev. Device Disk Controller (DKC) Add Disk Controller (DKC)
Page 357 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Add JNLG to EXCTG, EXCTG Edit-EXCTG Operation Remove JNLG from EXCTG ShadowImage- Pair Operation Add Pair Add Pair Mainframe Split Pair Split Pair Resync Pair Resync Pair Suspend Pair Suspend Pair...
Page 358 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name HP XP External Volume Add Volume Ext Stor AddVolume(FIBRE) Storage Operation Delete Volume DeleteVolume(FIBRE) Alternate Path (ADD / Delete / Priority UP / ChangePaths(FIBRE) Priority Down) Check Paths &...
Page 359 Option Operation Output of Audit Log Information File Launching Operation Function Operation Name Menu Name Audit Log Set Audit Log buffer Audit Log Buffer Setting Encryption Backup Encryption Key Enc. Key Backup Restore Encryption Key Enc. Key Restore Environmental LicenseKey Install PP KEY PP Install chk...
Page 360 • When you apply two or more settings at one time, the log information is output according to the priority shown in Table 313. When you perform two or more operations on one target and select Apply, the log information is output as one entry. If the priority is the same, the log information is output in the order of the operations performed.
Page 361: Lun Manager Operation And Priority Of Audit Log Output
For information on using XP Auto LUN Software, contact HP Technical Support. Table 313 LUN Manager Operation and Priority of Audit Log Output Operation Target of Operation Priority Delete Host Group Disk Controller (DKC) connection UUID Host Group Change Host Group Changing Host Mode Command Device Command Dev.
Page 362 Audit Log Information File Output by Function...
Page 363: B Svp Operations Output To The Audit Log File
B SVP Operations Output to the Audit Log File Table 314 describes SVP operations and the operation name that is output to Audit Log File. Table 314 SVP Operations Output to the Audit Log File GUI operation Output of Audit Log File SVP start Function Operation...
Page 364 GUI operation Output of Audit Log File SVP start Function Operation Function Operation Name button Name Logical Device Logical Device Format Format Format Format Stop Change Installation Install Configuration De-installation Uninstall System Option System Option Disk Unit (DKU) Emulation DKU Emulation System Tuning System Tuning LUN Configuration...
Page 365 GUI operation Output of Audit Log File SVP start Function Operation Function Operation Name button Name Force Reset Make LUSE Release LUSE DCR Configuration DCR Prestaging M/F DCR Open DCR Install CV CVS Configuration Volume to Space Make Vol./Vol.Init Copy Config Configuration Update Update Config Files...
Page 366 GUI operation Output of Audit Log File SVP start Function Operation Function Operation Name button Name Setting Battery Setting Battery Life Set Battery Life Life Set Machine Set Machine Install Date Machine Install Date Install Date Information Complete Information SIM Complete Delete Delete Log SIM Reporting Option...
Page 367: C Cfl Extension Operations Output To The Audit Log Information File
C CFL Extension Operations Output to the Audit Log Information File This appendix describes CFL Extension operations and the operation name that is output to audit log information file. See Table 315. Table 315 CFL Extension Operations Output to the Audit Log Information File CFL Extension operations Audit Log Information File Output Note...
Page 368 CFL Extension Operations Output to the Audit Log Information File...
Page 369: D Acronyms And Abbreviations
D Acronyms and Abbreviations application program interface Auto LUN HP XP Auto LUN Software Configuration File Loader channel adapter CLPR Cache Logical Partition (part of HP XP Disk/Cache Partition) CPAV HP XP for Compatible Parallel Access Volumes Software consistency consistency group control unit custom volume, customized volume (part of Virtual LVI/LUN) DASD...
Page 370 L1, L2 level 1, level 2 local-area network logical block address local control port LDEV logical device logical unit logical unit number LUNM LUN Manager LUSE LUN Expansion (also called LU Size Expansion) logical volume image megabytes main control unit message information block mirror unit M-VOL...
Page 371 P-VOL primary volume RAID redundant array of independent disks remote control unit R-VOL remote volume small form-factor pluggable SHRED Volume Shredder service information message SLPR Storage Logical Partition (part of HP XP Disk/Cache Partition) shared memory SMPL simplex SNMP simple network management protocol SSID subsystem ID secondary volume (HP XP Continuous Access Software), source volume (ShadowImage for...
Page 372 Acronyms and Abbreviations...

This manual is also suitable for:

Storageworks xp24000 Storageworks xp20000

HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Quick Links

Related Manuals for HP StorageWorks XP20000/XP24000 - Disk Array

Summary of Contents for HP StorageWorks XP20000/XP24000 - Disk Array