Set Fibre Topology Operation; Set Host Mode Operation - HP XP20000/XP24000 Reference Manual

Detailed Information
Detailed information displays for this operation, as shown in
Table 147 Set Fibre Address Operation
Item
Port
Fibre Addr.
Num. of Ports

Set Fibre Topology Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],Num. of Ports=4
[Install]
Install function
Set Fibre Topology
Set Fibre Topology operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 148 Set Fibre Topology Operation
Item
Port
Fabric
Connection
Num. of Ports

Set Host Mode Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Mode,option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX,
0x00,0xXXXXXXXX,
0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],
Num. of Host Groups=2
[Install]
Install function
Set Host Mode
Set Host Mode operation
Normal end
136 Install Function
Description
The name of the port that the fibre address has been set.
The address of Fibre Channel port after change using a number from 1 to 126.
See "Output Values to Detailed Info and Addresses of Fibre Channel Port" (page 161)
relation of number and Fibre Channel port address.
The number of ports where address has been set.
Description
The name of the port where the topology of Fibre Channel is set.
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is set.
Table 147 (page 136).
Table 148 (page 136).
for