Mp Install Operation; Micro Program Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed information displays for this operation, as shown in
Table 134 Micro Program Operation
Item
Micro Media
Exchange How
Open Port Mode
Reboot Grp.
Micro Kind
Old Ver
New Ver
Num.of Kind

MP Install Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],MP Install,,Normal end,,,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG},
Num. of Kind=7
+Target MP={CHP00-1E,CHP01-1E,DKP80-1A},Num. of MP=3
[Install]
Install function
MP Install

MP Install operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 135 MP Install Operation
Item
Micro Program
172 Install Function
Description
The media which the microcode to be exchanged is stored (Floppy disk, CD-ROM, SVP
HDD, HDD Backup or remote transfer).
The method to exchange the microcode.
Online: Exchanging the microcode online, Offline: Exchanging the microcode offline.
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
The reboot group (By1/2, By1/4, or By One). However, it is not output when microcode
is changed offline, or MP reboot is not executed.
The kind of microcode.
The old version number of the microcode.
The new version number of the microcode.
The number of the kind of microcode.
Description
The kind of microcode installed.
Table 134.
Table 135.