Change Rcu Option Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
RCU LDKC
Path Gr.ID
Controller ID
MCU
RCU
SSID
MCU Port
RCU Port
Min.Path
MIH Time(s)
Round Trip Time
(ms)
Incident
FREEZE
Num of Port Pairs

Change RCU Option Operation

Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Change RCU Option,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,MIH Time(s),Round Trip Time(ms),Incident,
FREEZE}={99999,0x00,0x00,Default,4,08,015,001,only to RCU host,Disable}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Change RCU Option,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,SSID,Controller ID,Min.Path,MIH Time(s),Round Trip Time(ms),Incident,
FREEZE}={99999,0x00,0x3F,0x00,0x0004,4,08,015,001,only to RCU host,Disable}
[RCU]
Description
The LDKC number of the paired LDKC.
The path group ID of the registered RCU. When the path group ID is default setting,
Default is output.
The controller ID of the registered RCU device.
The CU number of the connected CU.
The CU number of the paired CU.
The SSID of the registered RCU.
The port number of MCU.
The port number of the registered RCU.
The number of set minimum paths.
The value of set RIO MIH (Remote I/O Missing Interrupt Handler) timer (wait time until
data copy from MCU to RCU is completed). The unit is second.
The round-trip response time set (delay time for round-trip remote I/O). The unit is
millisecond. This value is output when HP XP Continuous Access Software or TrueCopy
for Mainframe is used.
The set incident of the RCU. This value is output only when TrueCopy for Mainframe is
used.
only to RCU host: RCU host only, to any host.
Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support is enabled or
disabled. This value is output only when TrueCopy for Mainframe is used.
Enable or Disable is output.
The number of port pairs set.
XP24000/XP20000 Audit Log User and Reference Guide 259