Set Ctrl Kind Operation; Set Priority (Prio) Port Operation; Parameters For Set Ctrl Kind Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
Mode

Set Ctrl Kind Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Ctrl Kind,Kind=WWN,Normal end,,,
Seq.=xxxxx
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set Ctrl Kind
Set Ctrl Kind operation
Kind=WWN
WWN is selected as the parameter. The operation uses the following parameters, as shown in
218.
Table 218 Parameters for Set Ctrl Kind Operation
Parameter
Port
All Port
WWN
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).

Set Priority (Prio) Port Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Prio Port,,Normal end,,,
Seq.=xxxxx +{Port,Priority,Use,Threshold/Upper Limit,Mode}=[{1A,Non-Prio,
Enable,XXXXXXXX,IOPS},{3A,Prio,Disable,,}],Num. of Ports=2
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set Prio Port
Set Prio Port operation
Normal end
Description
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate
This value is output only when the All Thresholds value is set.
Description
Port Control is applied without the All Thresholds value being set.
Port Control is applied with the All Thresholds value being set.
WWN Control is applied. This value is output whether the All Thresholds value is set or
not.
XP24000/XP20000 Audit Log User and Reference Guide
Table
241