Make Vol./Vol. Init Operation; Make Luse Operation; Parameters For Make Vol./Vol. Init Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 131 Make LUSE Operation
Item
LUSE(LDKC:CU:LDEV)
Num. of LUSEs

Make Vol./Vol. Init Operation

This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Make Vol./Vol. Init,,Normal end,,,Seq.=xxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID}=[{1-1-(1),
0x00:0x14:0x00,
-,OPEN-V,205440,LBA,Disable,0x0005}],Num. of LDEVs=1
[Install]
Install function
Make Vol./Vol. Init
Make Vol./Vol. Init operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table
Table 132 Parameters for Make Vol./Vol. Init Operation
Parameter
No parameter
Non Format
Progress Close
Quick Format
Quick Format Close
NOTE:
No parameters are selected for any case other than those described in this table.
170 Install Function
Description
The LDKC, CU, and LDEV numbers of several LDEVs combined into a LUSE volume. The
number indicated at the beginning represents the LDKC, CU, and LDEV numbers of the
top LDEV.
The number of LUSE volumes configured
132.
Description
Formatted Make Volume or Volume Initialize.
Unformatted Make Volume or Volume Initialize.
The progress window of LDEV format is closed.
Quick Format is selected.
The progress window of preparing for Quick Format is closed.
Table 131.