System-Option Operation; Parameters For R-Cmd.dev. Operation; R-Cmd.dev. Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Assign is selected as the parameter. The operation uses the following parameters as shown in
67.
Table 67 Parameters for R-Cmd.Dev. Operation
Item
Assign
Release
Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in
Table 68 R-Cmd.Dev. Operation
Item
LDKC
JNLG
MirrorID
Cmd.Dev.(LDKC:CU:LDEV)
Result
Num. of Mirrors

System-Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac-J],System-Option,,Normal end,,,Seq.=xxxxx
+Max Initial Copy=64
[Cnt Ac-J]
HP XP Continuous Access Journal Software function
System-Option
System-Option operation
112 XP Continuous Access Journal Software Function
Description
The remote command device is assigned.
The remote command device is released.
Description
The LDKC number that the journal group belongs
The journal group number
The mirror ID
The LDKC, CU , and LDEV numbers of the remote command device
The hyphen (-) displays under the following conditions:
• When assigning a remote command device without specifying a remote
command device as a parameter
• When releasing a remote command device
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of mirrors changed
Table 68.
Table