29 Performance Monitor Function; Monitoring Switch (S/W) Operation; Monitoring Switch (S/W) & Cu Operation; Parameters For Monitoring S/W Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

29 Performance Monitor Function

Monitoring Switch (S/W) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Perf Mon],Monitoring S/W,Enable 60sec,,Normal end,,,Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W
Monitoring Options operation
Enable 60sec
Enable 60sec is the selected parameter. The operation uses the following parameters, as shown in
Table 224.
Table 224 Parameters for Monitoring S/W Operation
Parameter
Enable XXsec
Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Monitoring Switch (S/W) & CU Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Mon], Monitoring S/W & CU, Enable
Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W & CU
Monitoring Options operation
Enable 60sec
Description
Monitoring is enabled and the gathering interval is set as XX sec.
Monitoring is disabled.
XP24000/XP20000 Audit Log User and Reference Guide
60sec ,Normal end,,,
247