Table of Contents
Advertisement
Set Security Option
When you enable the security option, users must enter a password to access the
SuperLoader's functionality. A password allows either administrator-level access
or operator-level access. (For more information on levels of password-protection,
see "Security").
To set the security option:
1. On any Web Administration page, click Configurations.
2. On the secondary menu, click Security.
Figure 78: Security option
3. If a checkmark appears in the box next to Security, the security option is
4. Click submit.
1/16 Tape SuperLoader Reference Guide
enabled. To disable the security option, click the box to remove the
checkmark. If no checkmark appears in the box next to Security, the security
option is disabled. To enable the security option, click the box to enter a
checkmark.
SuperLoader Operation
87
Advertisement
Table of Contents
