Step 3: Install Msa1500 Cs Option Kits - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Installation Procedures - All Deployments

Step 3: Install MSA1500 cs option kits

If your plans include adding any of the available option kits for the MSA1500 cs,
install them now. It is easier to install these options before racking the system.
MSA1500 cs option kits include:
Figure 2: Installing a redundant Fibre Channel module and additional SCSI module
Note:
install an additional Fibre Channel I/O module. Redundant (multi-path) environments
must include separate and complete Fibre Channel fabrics and the associated
hardware and software components, including two controllers, two Fibre Channel I/O
modules, two Fibre Channel switches, and two HBAs in each server.
Note:
SCSI I/O module bays from right-to-left, so that the attached storage enclosures are
added in pre-assigned box-number order. See
connections" on page 40 for more information.
For information about installing the options, refer to the instructions that came
with the option kit.
Go to
about your option kits.
28
Additional controller cache
Additional SCSI I/O module
Redundant MSA1000 controller
Redundant Fibre Channel I/O module
When installing a redundant MSA1000 controller, you must also obtain and
When installing additional SCSI I/O modules, HP recommends populating the
Table 9: "MSA1500 cs
"Recommended SCSI cable
Information" on page 86 to record information
Modular Smart Array 1500 cs Installation Guide