Editing An Ipsec Policy; Deleting An Ipsec Policy - HP StorageWorks SN6000 - Fibre Channel Switch User Manual
Hp storageworks simple san connection manager user guide (5697-0267, february 2010)
Hide thumbs
Also See for StorageWorks SN6000 - Fibre Channel Switch:
- Command line interface manual (330 pages) ,
- User manual (114 pages) ,
- Installation and reference manual (94 pages)
Table of Contents
Advertisement
4.
To save the new IPsec policy and close the IPsec Policy dialog box, click OK. To abandon creation of
the IPsec policy, click Cancel.
5.
When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION:
Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Editing an IPsec policy
To edit an IPsec policy:
1.
On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2.
Under IPsec Policies, select the policy that you want to modify, and then click Edit.
The IPsec Policy dialog box opens
3.
Modify the existing security policy settings, and then click OK to save your changes. (For an
explanation on each of the fields on the IPsec Policy dialog box, see
page 72.)
4.
When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION:
Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Deleting an IPsec policy
To delete an IPsec policy:
1.
On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2.
Under IPsec Policies, select the policy that you want to remove, and then click Delete.
3.
When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION:
Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Figure 40
on page 72) and lists the existing IPsec
(Figure 41
on page 73).
Figure 40
on page 72) and lists the existing IPsec
HP StorageWorks Simple SAN Connection Manager User Guide
"Creating an IPsec policy"
on
75
Advertisement
Table of Contents
