Job Schedule Parameters - HP StorageWorks D2D100 - Backup System User Manual

9. Enter a name for the Schedule and select the appropriate Scheduling parameters. Click Create.
Table 17 Job schedule parameters
Schedule Name:
Schedule Type:
Day:
Time:
Active:
Unload After
Completion:
Verify:
138
Using Tape Attach
This field allows you to provide a meaningful name for the scheduled job.
• For daily jobs, select Daily.
• For weekly jobs, select Weekly.
• For jobs that you wish to run on a specific date in the month, select Day of the
Month.
• For jobs that you wish to run on a specific day and week in the month, select
Weekday of Month.
• For jobs that you wish to run as soon as the cartridge has been written, select
After Write.
This field is not relevant for Daily jobs and After Write jobs. For Weekly jobs,
select the day of the week. For Monthly by day, select a day between 1 and 31.
For months with less than 31 days, the job is always run on the last day of the
month. For Weekday of the Month, select First/Second/Third/Fourth/Last week
and then the day of the week.
This field is not relevant for After Write jobs. It is the time at which the job is to
run: hour (24-hour clock) and minute.
Use this check box to control whether a schedule is active. The default is active
(box is checked).
Use this check box you to control whether the cartridge is unloaded once
the scheduled job completes. The default is to remain loaded (the box is not
checked). If the attached device is a library the tape will be moved to the mail
slot if there is an empty mail slot.
This determines how the data that has been created on the physical cartridge is
to be verified with the original data on the HP D2D Backup system. There are
three options: None, Quick and Full. The default is Full.