Restore Processes Without Replication; Restore Scenarios - HP StorageWorks D2D100 - Backup System User Manual

10 Restore processes without
replication
In this chapter:
• "Restore scenarios" on page 145
• "Restoring single
• "Restore and
• "Reconnecting to HP D2D after host
NOTE:
If you are using replication, there are other options for restoring data. See
"Recovering a source

Restore scenarios

The following table illustrates the three main restore scenarios.
Table 19 Restore scenarios
Basic file restore
Restore after
host failure
Restore after site
failure
files" on page 146
deduplication" on page 146
failure" on page 146
appliance" on page 74.
From HP D2D Backup System
Use the backup application to restore files
from the HP D2D to the host, as required.
1.
Rebuild the host and reconnect to the
HP D2D.
2. Use the backup application to restore
files from the HP D2D to the host.
From a physical tape drive connected to
the HP D2D
1. Replace the HP D2D.
2. Rebuild the host and reconnect to the
HP D2D.
3. Import the cartridge from the attached
tape drive.
• If the tape drive is attached to the
HP D2D, use the Web Management
Interface to import the cartridge to
the HP D2D mail slot. Then use
the backup application to move the
cartridge back into the library slot
on the HP D2D and restore data to
the host. See Chapter 8.
• If the tape drive is attached to the
host, use the backup application
to restore data to the host. See
Chapter 8.
D2D Backup System HP D2D2503
145