If An Error Occurs; Job History (Tape Attach) - HP StorageWorks D2D100 - Backup System User Manual

NOTE:
There are three phases to an export job: copy, an optional verify and subsequent removal of cartridge
data from the HP D2D Backup System. If the job is cancelled during the copy process, an error will be
reported and the data will remain on the HP D2D Backup System. If it is cancelled during the verify
process, the data will be left intact on the physical tape and the data will still be removed from the HP
D2D Backup System.

If an error occurs

Errors may occur if there is a tape read/write media problem, if there is not enough capacity on the
physical cartridge or if there is a verify error. Errors may also occur if the backup application accesses
the cartridge that is being exported/imported or copied.
Errors are reported in the Job Status column on this page.
IMPORTANT:
If an error occurs during export or copy, you do not lose any data. The original data remains unaltered
in its original location on the HP D2D Backup System.

Job History (Tape Attach)

This page provides details of the last 1000 tape export, import and copy jobs. The job mode (copy,
export or import), HP D2D library device, slot and cartridge barcode, physical device name, slot and
barcode, start time and job status are displayed. The most recent job is shown at the top of a scrollable
list. The final column shows the Job Status.
D2D Backup System HP D2D2503
141