HP StorageWorks D2D100 - Backup System User Manual page 71

3.
Decide how you will seed the first full backup on the Target Appliance. (See also
"Seeding the Replication Target
• If you are seeding across the WAN or have been able to colocate the Target Appliance on the
same LAN as the Source Appliance, go to step 4.
• If you are seeding using physical tape media:
1.
Use Tape Attach to copy the first full backup to physical media.
2.
Transport the physical media to the replication target site.
3. Create a Non-Replicating Library on the Target Appliance.
4.
Import the physical media into a slot within the Non-Replicating Library on the Target
Appliance.
4. Go to the Mapping-Configuration page and select a Non-Replicating Library to be converted to a
Replication Source Library.
5.
Click Start Replication Wizard. This takes you to the Select Target Appliance step.
TIP:
Click on the show/hide details link to check how many target appliances are
permitted and the number of target appliances that are currently configured. See
"Fan In, Fan Out and job
maximum number of appliances that are supported.
Appliance" on page 68.)
concurrency" on page 61 for more information about the
D2D Backup System HP D2D2503
71