Job Schedule Parameters - HP StorageWorks D2D - Backup Systems User Manual

8. Click Next to display the final page of the wizard.
9. Enter a name for the Schedule and select the appropriate Scheduling parameters. Click Create.
Table 17 Job schedule parameters
Schedule Name:
Schedule Type:
Day:
Time:
Active:
166 Using Tape Attach
This field allows you to provide a meaningful name for the scheduled job.
• For daily jobs, select Daily.
For weekly jobs, select Weekly.
•
• For jobs that you wish to run on a specific date in the month, select Day of the
Month.
• For jobs that you wish to run on a specific day and week in the month, select
Weekday of Month.
• For jobs that you wish to run as soon as the cartridge has been written, select
After Write.
This field is not relevant for Daily jobs and After Write jobs. For Weekly jobs, select
the day of the week. For Monthly by day, select a day between 1 and 31. For
months with less than 31 days, the job is always run on the last day of the month.
For Weekday of the Month, select First/Second/Third/Fourth/Last week and then
the day of the week.
This field is not relevant for After Write jobs. It is the time at which the job is to run:
hour (24-hour clock) and minute.
Use this check box to control whether a schedule is active. The default is active
(box is checked).